|
|
Número de pieza | 74AHC1G02 | |
Descripción | 2-input NOR gate | |
Fabricantes | NXP Semiconductors | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 74AHC1G02 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! INTEGRATED CIRCUITS
DATA SHEET
74AHC1G02; 74AHCT1G02
2-input NOR gate
Product specification
Supersedes data of 1998 Nov 25
File under Integrated Circuits, IC06
1999 Jan 27
1 page Philips Semiconductors
2-input NOR gate
Product specification
74AHC1G02; 74AHCT1G02
DC CHARACTERISTICS
Family 74AHC1G
Over recommended operating conditions; voltage are referenced to GND (ground = 0 V).
TEST CONDITIONS
SYMBOL
PARAMETER
OTHER
VCC (V)
MIN.
VIH HIGH-level input
voltage
2.0 1.5
3.0 2.1
5.5 3.85
VIL LOW-level input voltage
2.0 −
3.0 −
5.5 −
VOH HIGH-level output
VI = VIH or VIL; 2.0
1.9
voltage; all outputs
IO = −50 µA
3.0 2.9
4.5 4.4
VOH HIGH-level output
voltage
VI = VIH or VIL;
IO = −4.0 mA
3.0
2.58
VI = VIH or VIL;
IO = −8.0 mA
4.5
3.94
VOL LOW-level output
VI = VIH or VIL; 2.0
−
voltage; all outputs
IO = 50 µA
3.0 −
4.5 −
VOL LOW-level output
voltage
VI = VIH or VIL;
IO = 4 mA
3.0
−
VI = VIH or VIL;
IO = 8 mA
4.5
−
II
input leakage current VI = VCC or GND 5.5
−
ICC quiescent supply
current
VI = VCC or GND; 5.5
IO = 0
−
CI input capacitance
−
+25
TYP.
−
−
−
−
−
−
2.0
3.0
4.5
−
−
0
0
0
−
−
−
−
1.5
Tamb (°C)
−40 to +85
MAX. MIN. MAX.
− 1.5 −
− 2.1 −
− 3.85 −
0.5 −
0.5
0.9 −
0.9
1.65 −
1.65
− 1.9 −
− 2.9 −
− 4.4 −
− 2.48 −
− 3.8 −
0.1 −
0.1 −
0.1 −
0.36 −
0.1
0.1
0.1
0.44
0.36 −
0.44
0.1 −
1.0 −
1.0
10
10 −
10
UNIT
V
V
V
V
V
V
µA
µA
pF
1999 Jan 27
5
5 Page Philips Semiconductors
2-input NOR gate
Product specification
74AHC1G02; 74AHCT1G02
Suitability of surface mount IC packages for wave and reflow soldering methods
PACKAGE
BGA, SQFP
HLQFP, HSQFP, HSOP, SMS
PLCC(3), SO, SOJ
LQFP, QFP, TQFP
SSOP, TSSOP, VSO
WAVE
not suitable
not suitable(2)
suitable
not recommended(3)(4)
not recommended(5)
SOLDERING METHOD
REFLOW(1)
suitable
suitable
suitable
suitable
suitable
Notes
1. All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum
temperature (with respect to time) and body size of the package, there is a risk that internal or external package
cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the
Drypack information in the “Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods”.
2. These packages are not suitable for wave soldering as a solder joint between the printed-circuit board and heatsink
(at bottom version) can not be achieved, and as solder may stick to the heatsink (on top version).
3. If wave soldering is considered, then the package must be placed at a 45° angle to the solder wave direction.
The package footprint must incorporate solder thieves downstream and at the side corners.
4. Wave soldering is only suitable for LQFP, TQFP and QFP packages with a pitch (e) equal to or larger than 0.8 mm;
it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
5. Wave soldering is only suitable for SSOP and TSSOP packages with a pitch (e) equal to or larger than 0.65 mm; it is
definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
DEFINITIONS
Data sheet status
Objective specification
Preliminary specification
Product specification
This data sheet contains target or goal specifications for product development.
This data sheet contains preliminary data; supplementary data may be published later.
This data sheet contains final product specifications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
1999 Jan 27
11
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet 74AHC1G02.PDF ] |
Número de pieza | Descripción | Fabricantes |
74AHC1G00 | 2-input NAND gate | NXP Semiconductors |
74AHC1G00 | SINGLE 2 INPUT POSITIVE NAND GATE | Diodes |
74AHC1G02 | 2-input NOR gate | NXP Semiconductors |
74AHC1G02 | SINGLE 2 INPUT POSITIVE NOR GATE | Diodes |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |