|
|
PDF PE42551 Data sheet ( Hoja de datos )
| Número de pieza | PE42551 | |
| Descripción | RF Switch | |
| Fabricantes | Peregrine Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PE42551 (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
|
No Preview Available !
Product Description
The PE42551 RF Switch is designed to support the
requirements of the test equipment and ATE market. This
broadband general purpose switch maintains excellent RF
performance and linearity from 9 kHz through 6000 MHz. The
PE42551 integrates on-board CMOS control logic driven by a
single-pin, low voltage CMOS control input. It also has a logic
select pin which enables changing the logic definition of the
control pin. Additional features include a novel user defined
logic table, enabled by the on-board CMOS circuitry. The
PE42551 also exhibits outstanding isolation that approaches
21 dB at 6000 MHz and is offered in a small 4x4x0.85 mm
QFN package.
The PE42551 is manufactured on Peregrine’s UltraCMOS®
process, a patented variation of silicon-on-insulator (SOI)
technology on a sapphire substrate, offering the performance of
GaAs with the economy and integration of conventional CMOS.
Figure 1. Functional Diagram
Peregrine Specification 71-0065
Product Specification
PE42551
SPDT UltraCMOS® RF Switch
9 kHz - 6000 MHz
Features
• HaRP™-Technology –Enhanced
• Eliminates Gate and Phase Lag
• No insertion loss nor phase drift
• Fast settling time
• High linearity 50 dBm IIP3
• Low insertion loss: 0.65 dB at 3000 MHz,
0.90 dB at 6000 MHz
• High isolation of 29 dB at 3000 MHz,
21 dB at 6000 MHz
• High power 1 dB compression point
of +34 dBm
• ESD: 500 V HBM
• Single-pin 2.75V CMOS logic control
• Logic select pin to change definition of
logic control
• Reflective switch design
• 20-lead 4x4x0.85 mm QFN package
Figure 2. Package Type
20-lead 4x4x0.85 mm QFN
Table 1. Electrical Specifications @ +25°C, VDD = 2.75V (ZS = ZL = 50 Ω)
Parameter
Conditions
Min
Operation Frequency
Insertion Loss
Isolation – RF1 to RF2
Return Loss
RF1, RF2 and RFC
Switching Time
Input 1 dB Compression
Input IP3
9 kHz
3000 MHz
6000 MHz
3000 MHz
6000 MHz
3000 MHz
6000 MHz
50% CTRL to 0.1 dB final value
6000 MHz
6000 MHz
9 kHz
28
14
32
Note: Device linearity will begin to degrade below 10 MHz.
Typical
0.55
0.65
0.90
29
21
18
14
7
34
+50
Max
6000
0.65
0.75
Units
MHz
dB
dB
dB
dB
dB
dB
dB
µs
dBm
dBm
Document No. 70-0350-02 │ www.psemi.com
©2010-2012 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 9
1 page  
Typical Performance Data
Figure 7. Insertion Loss: RFC-RF1@ 25°C
PE42551
Product Specification
Figure 8. Insertion Loss: RFC-RF1@ 2.75V
Figure 9. Insertion Loss: RFC-RF2 @ 25°C
Figure 10. Insertion Loss: RFC-RF2 @ 2.75V
©2010-2012 Peregrine Semiconductor Corp. All rights reserved.
Page 5 of 9
Document No. 70-0350-02 │ UltraCMOS® RFIC Solutions
5 Page | ||
| Páginas | Total 9 Páginas | |
| PDF Descargar | [ Datasheet PE42551.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PE42551 | RF Switch | Peregrine Semiconductor |
| PE42552 | SPDT UltraCMOS RF Switch DC - 7500 MHz | Peregrine Semiconductor |
| PE42553 | SPDT RF Switch | Peregrine Semiconductor |
| PE42556 | SPDT RF Switch | Peregrine Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |