|
|
Número de pieza | XB1014-QT | |
Descripción | Buffer Amplifier | |
Fabricantes | MA-COM | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de XB1014-QT (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! XB1014-QT
Buffer Amplifier
37.0 - 40.0 GHz
Features
• 21.0 dB Small Signal Gain
• +22.0 dBm Psat
• +20.0 dBm P1dB
• +30.5 dBm Output IP3
• Variable Gain with Adjustable Bias
• Lead-free 3 mm 16-lead PQFN Package
• 100% RF, DC and Output Power Testing
• RoHS* Compliant and 260°C Reflow Compatible
Description
The XB1014-QT is a three stage 37.0-40.0 GHz
GaAs MMIC buffer amplifier that has a small signal
gain of 21.0 dB and 20.0 dBm P1dB output
compression point. The device also provides
variable gain regulation with adjustable bias. The
device is ideally suited as an LO or RF buffer stage
with broadband performance at a very low cost.
The device comes in an RoHS compliant 3x3mm
QFN surface mount package offering excellent RF
and thermal properties. This device has been
designed for use in 38 GHz Point-to-Point
Microwave Radio applications.
Ordering Information
Part Number
XB1014-QT-0G00
XB1014-QT-0G0T
XB1014-QT-EV1
Package
bulk quantity
tape and reel
evaluation board
Functional Schematic
VD1 VD2 VD3
Rev. V2
GND
RFIN
GND
GND
RFOUT
GND
VG1 VG2 VG3
Pin Configuration1
Pin No. Function Pin No. Function
3
RF Input
10 RF Output
5 Gate 1 Bias 13 Drain 3 Bias
6 Gate 2 Bias 14 Drain 2 Bias
7 Gate 3 Bias 15 Drain 1 Bias
1. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
1 page XB1014-QT
Buffer Amplifier
37.0 - 40.0 GHz
Rev. V2
App Note [1] Biasing - It is recommended to bias the amplifier with Vd=4.0 V and IdTOTAL=250 mA. It is
also recommended to use active biasing to keep the currents constant as the RF power and temperature
vary; this gives the most reproducible results. Depending on the supply voltage available and the power
dissipation constraints, the bias circuit may be a single transistor or a low power operational amplifier, with
a low value resistor in series with the drain supply used to sense the current. The gate of the pHEMT is
controlled to maintain correct drain current and thus drain voltage. The typical gate voltage needed to do
this is -0.3 V. Typically the gate is protected with Silicon diodes to limit the applied voltage. Also, make sure
to sequence the applied voltage to ensure negative gate bias is available before applying the positive drain
supply.
App Note [2] Bias Arrangement - Each DC pin (Vd and Vg) needs to have DC bypass capacitance
(100pF/10nF/1uF) as close to the package as possible.
Typical Application
XP1080-QK XB1014-QT
RF OUT
37.0-39.5 GHz
XU1019-QH
XMixer
Buffer
X2
Coupler
IF In
2 GHz
LO
MMIC-based 37.0-40.0 GHz Transmit t er Block Diagram
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet XB1014-QT.PDF ] |
Número de pieza | Descripción | Fabricantes |
XB1014-QT | Buffer Amplifier | MA-COM |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |