Datenblatt-pdf.com


FB1A4A Schematic ( PDF Datasheet ) - NEC

Teilenummer FB1A4A
Beschreibung on-chip resistor NPN silicon epitaxial transistor
Hersteller NEC
Logo NEC Logo 




Gesamt 8 Seiten
FB1A4A Datasheet, Funktion
DATA SHEET
COMPOUND TRANSISTOR
FB1 SERIES
on-chip resistor NPN silicon epitaxial transistor
For mid-speed switching
FEATURES
• Up to 0.7 A current drive available
• On-chip bias resistor
• Low power consumption during drive
PACKAGE DRAWING (UNIT: mm)
QUALITY GRADES
• Standard
Please refer to “Quality Grades on NEC Semiconductor
Devices” (Document No. C11531E) published by NEC Corporation
to know the specification of quality grade on the devices and its
recommended applications.
FB1 SERIES LISTS
Products
Marking
FB1A4A
FB1L2Q
FB1A3M
FB1F3P
FB1J3P
FB1L3N
FB1A4M
P30
P31
P32
P33
P36
P34
P35
R1 (K)
0.47
1.0
2.2
3.3
4.7
10
R2 (K)
10
4.7
1.0
10
10
10
10
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
Parameter
Symbol
Ratings
Unit
Collector to base voltage
VCBO
30
V
Collector to emitter voltage
VCEO
25
V
Emitter to base voltage
VEBO
10
V
Collector current (DC)
IC(DC)
0.7
A
Collector current (Pulse)
IC(pulse) *
1.0
A
Base current (DC)
IB(DC)
20
mA
Total power dissipation
PT
200
mW
Junction temperature
Tj
150
°C
Storage temperature
Tstg 55 to +150
°C
* PW10 ms, duty cycle50 %
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. D16180EJ1V0DS00 (1st edition)
Date Published April 2002 N CP(K)
Printed in Japan
©
21090928






FB1A4A Datasheet, Funktion
FB1 SERIES
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions.
For soldering methods and conditions other than those recommended below, contact an NEC sales representative.
Surface MOUNTING TYPE
For details of the recommended soldering conditions, refer to the document Semiconductor Device Mounting
Technology Manual (C10535E).
Soldering Method
Soldering Conditions
Recommended
Condition Symbol
Infrared reflow
Package peak temperature: 230°C, Time: 30 sec. max. (at 210°C or higher),
Count: Once, Exposure limit: None *
IR30-00
VPS
Package peak temperature: 215°C, Time: 40 sec. max. (at 200°C or higher),
Count: Once, Exposure limit: None *
VP15-00
Partial heating
Pin temperature: 300°C max., Time: 10 sec. max. Exposure limit: None *
O
* After opening the dry pack, store it at 25°C or less and 65% RH or less for the allowable storage period.
Cautions 1. Do not use different soldering methods together (except for partial heating).
2. Prevent the resin surface temperature from being higher than the board temperature by 20°C or
more.
6 Data Sheet D16180EJ1V0DS

6 Page







SeitenGesamt 8 Seiten
PDF Download[ FB1A4A Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
FB1A4Aon-chip resistor NPN silicon epitaxial transistorNEC
NEC
FB1A4Mon-chip resistor NPN silicon epitaxial transistorNEC
NEC

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche