Datenblatt-pdf.com


PS8802-1 Schematic ( PDF Datasheet ) - Renesas

Teilenummer PS8802-1
Beschreibung HIGH-SPEED PHOTOCOUPLER
Hersteller Renesas
Logo Renesas Logo 




Gesamt 18 Seiten
PS8802-1 Datasheet, Funktion
DATA SHEET
PHOTOCOUPLER
PS8802-1,-2
1 Mbps HIGH CMR ANALOG OUTPUT TYPE
8-PIN SSOP (SO-8)
HIGH-SPEED PHOTOCOUPLER
NEPOC Series
DESCRIPTION
The PS8802-1, -2 are optically coupled isolators containing a GaAlAs LED on the light emitting diode (input side)
and a PIN photodiode and a high-speed amplifier transistor on the output side on one chip.
The PS8802-1, -2 are designed specifically for high common mode transient immunity (CMR), the PS8802-2 is
suitable for high density applications.
FEATURES
• 40% reduction of mounting area (5-pin SOP × 2)
• High common mode transient immunity (CMH, CML = ±15 kV/μs MIN.)
• High supply voltage (VCC = 35 V)
• High isolation voltage (BV = 2 500 Vr.m.s.)
• High-speed response (tPHL = 0.8 μs MAX., tPLH = 1.2 μs MAX.)
• Ordering number of tape product: PS8802-1-F3, F4: 1 500 pcs/reel
: PS8802-2-F3, F4: 1 500 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: File No. E72422
• DIN EN60747-5-2 (VDE0884 Part2) approved (option)
APPLICATIONS
• Computer and peripheral manufactures
• General purpose inverter
• Substitutions for relays and pulse transformers
• Power supply
PIN CONNECTION
(Top View)
PS8802-1
8765
1. NC
2. Anode
3. Cathode
4. NC
5. GND
1234
6. VO
7. NC
8. VCC
PS8802-2
8765
1234
1. Anode1
2. Cathode1
3. Cathode2
4. Anode2
5. GND
6. VO2
7. VO1
8. VCC
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PN10418EJ07V0DS (7th edition)
Date Published August 2008 NS
Printed in Japan
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
2003, 2008






PS8802-1 Datasheet, Funktion
PS8802-1,-2
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter
Symbol
Conditions
Diode
Forward Voltage
VF IF = 16 mA
Reverse Current
Forward Voltage
Temperature Coefficient
IR VR = 3 V
ΔVF/ΔTA IF = 16 mA
Terminal Capacitance
Ct V = 0 V, f = 1 MHz
Detector High Level Output Current IOH (1) IF = 0 mA, VCC = VO = 5.5 V
High Level Output Current IOH (2) IF = 0 mA, VCC = VO = 30 V
Low Level Output Voltage VOL IF = 16 mA, VCC = 4.5 V, IOL = 1.2 mA
High Level Supply Current ICCH IF = 0 mA, VO = open, VCC = 30 V
(PS8802-1)
High Level Supply Current
(PS8802-2)
Low Level Supply Current ICCL IF = 16 mA, VO = open, VCC = 30 V
(PS8802-1)
Low Level Supply Current
(PS8802-2)
Coupled Current Transfer Ratio
CTR IF = 16 mA, VCC = 4.5 V, VO = 0.4 V
Input-Output
Isolation Resistance
RI-O VI-O = 1 kVDC, RH = 40 to 60%
Insulation Resistance
RI-I VI-I = 1 kVDC, RH = 40 to 60%
(Input-Input), (PS8802-2)
Input-Output
Isolation Capacitance
CI-O V = 0 V, f = 1 MHz
Insulation Capacitance
(Input-Input), (PS8802-2)
Propagation Delay Time
(H L)*1
Propagation Delay Time
(L H)*1
Common Mode
Transient Immunity at
High Level Output*2
Common Mode
Transient Immunity at
Low Level Output*2
CI-I
tPHL IF = 16 mA, VCC = 5 V, RL = 2.2 kΩ,
CL = 15 pF
tPLH
CMH IF = 0 mA, VCC = 5 V, RL = 4.1 kΩ,
VCM = 1.5 kV
CML IF = 16 mA, VCC = 5 V, RL = 4.1 kΩ,
VCM = 1.5 kV
MIN.
15
1011
1010
15
15
TYP.
1.7
2.1
MAX.
2.2
10
Unit
V
μA
mV/°C
30 pF
10 500 nA
100 μA
0.1 0.4
V
0.1 2 μA
0.2 4
100
200
25 45 %
Ω
0.6 pF
0.3
0.3 0.8 μs
0.6 1.2
kV/μs
6 Data Sheet PN10418EJ07V0DS

6 Page









PS8802-1 pdf, datenblatt
PS8802-1,-2
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
180˚C
120˚C
120±30 s
(preheating)
(heating)
to 10 s
to 60 s
260˚C MAX.
220˚C
Time (s)
(2) Wave soldering
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature) 350°C or below
• Time (each pins)
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
12 Data Sheet PN10418EJ07V0DS

12 Page





SeitenGesamt 18 Seiten
PDF Download[ PS8802-1 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
PS8802-1(PS8802-1/-2) 1 Mbps HIGH CMR ANALOG OUTPUT TYPE 8-PIN SOP HIGH-SPEED PHOTOCOUPLERCEL
CEL
PS8802-1HIGH-SPEED PHOTOCOUPLERRenesas
Renesas
PS8802-2(PS8802-1/-2) 1 Mbps HIGH CMR ANALOG OUTPUT TYPE 8-PIN SOP HIGH-SPEED PHOTOCOUPLERCEL
CEL
PS8802-2HIGH-SPEED PHOTOCOUPLERRenesas
Renesas

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche