|
|
PDF V420H2-LS1 Data sheet ( Hoja de datos )
| Número de pieza | V420H2-LS1 | |
| Descripción | TFT LCD Module | |
| Fabricantes | CMI MEI | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de V420H2-LS1 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
PRODUCT SPECIFICATION
□ Tentative Specification
□ Preliminary Specification
■Approval Specification
MODEL NO.: V420H2
SUFFIX: LS1
Customer:
APPROVED BY
Name / Title
Note
SIGNATURE
Please return 1 copy for your confirmation with your
signature and comments.
Approved By
Chao-Chun Chung
Checked By
Ken Wu
Prepared By
Carlos Li
Version 2.0
1 Date：24 Dec. 2010
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
1 page  
PRODUCT SPECIFICATION
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V420H2- LS1 is a 42” TFT Liquid Crystal Display module with LED Backlight and 4ch-LVDS interface. This
module supports 1920 x 1080 Full HDTV format and can display 1.07G colors ( 8-bit+ FRC). The converter
module for backlight is built-in.
1.2 FEATURES
-High brightness (400 nits)
- Ultra-high contrast ratio (5000:1)
- Faster response time (gray to gray average 6 ms)
- High color saturation NTSC 72% (72%)
- Ultra wide viewing angle : 176(H)/176(V) (CR≥20) with Super MVA technology
- DE (Data Enable) only mode
- LVDS (Low Voltage Differential Signaling) interface
- Low color shift function
- RoHs compliance
1.3 APPLICATION
- TFT LCD TVs
- Multi-Media Display
1.4 GENERAL SPECIFICATI0NS
Item
Specification
Active Area
930.24 (H) x 523.26 (V) (42" diagonal)
Bezel Opening Area
937.24 (H) x 530.26 (V)
Driver Element
a-si TFT active matrix
Pixel Number
1920 x R.G.B. x 1080
Pixel Pitch (Sub Pixel)
0.1615 (H) x 0.4845 (V)
Pixel Arrangement
RGB vertical stripe
104.44 W
Power Consumption
(LVDS input Power 7.44 W + LED Backlight Power
97 W)
Display Colors
1.07G
Display Operation Mode
Transmissive mode / Normally Black
Unit
mm
mm
-
pixel
mm
-
Watt
color
-
Note
(1)
(2)
Surface Treatment
Anti-Glare Coating (Haze 11%)
Hard Coating (3H)
- (3)
Note (1) Please refer to the attached drawings in chapter 9 for more information about the front and back outlines.
Note (2) Please refer sec 3.1 and 3.2 for more information of Power consumption
Note (3) The spec. of the surface treatment is temporarily for this phase. CMI reserves the rights to change this feature.
Version 2.0
5 Date：24 Dec. 2010
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
5 Page 
PRODUCT SPECIFICATION
Note (3) The specified power consumption and power supply current is under the conditions at Vcc = 12 V, Ta =
25 ± 2 ºC, fv = 120 Hz, whereas a power dissipation check pattern below is displayed.
a. White Pattern
b. Black Pattern
Active Area
c. Horizontal Stripe Pattern
Active Area
Note (4) The LVDS input characteristics are as follows:
Version 2.0
11 Date：24 Dec. 2010
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet V420H2-LS1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| V420H2-LS1 | TFT LCD Module | CMI MEI |
| V420H2-LS2 | TFT LCD Module | CMI MEI |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |