Datenblatt-pdf.com


NX1WP10 Schematic ( PDF Datasheet ) - NXP Semiconductors

Teilenummer NX1WP10
Beschreibung A4WP compliant high frequency wireless charging receiver front end
Hersteller NXP Semiconductors
Logo NXP Semiconductors Logo 




Gesamt 5 Seiten
NX1WP10 Datasheet, Funktion
NX1WP10
A4WP compliant high frequency wireless charging receiver
front end
Rev. 1 — 1 October 2015
Objective short data sheet
1. General description
The NX1WP10 is an A4WP (Alliance for Wireless Power) compliant wireless power
receiver front end. It contains a high-voltage, highly efficient active rectifier, integrated
LDOs, a DC-to-DC converter, a multi-channel 12-bit ADC, four GPIOs and a Fast-Mode
I2C-bus interface. The integrated rectifier supports voltages of up to 20 V and is protected
by an integrated automatic clamping function and an automatic detuning function. The
DC-to-DC regulator delivers an adjustable output voltage between 4.2 V and 10 V with a
maximum DC current of up to 1.1 A. It is used to charge portable devices through a PMU
or a charging controller. The integrated LDOs are directly linked to the rectifier output.
They are automatically enabled once a sufficient voltage level at the output of the rectifier
is reached. These voltages are used to supply the corresponding wireless power receiver
controller and BT-LE transceiver. The host microcontroller configures the on-chip
controller for automatic interrupt-driven system control.
The microcontroller can measure the rectifier output voltage, current level information,
junction temperature and external temperature sensor information with the ADC. It
controls the DC-to-DC converter as well as the GPIOs. Key safety functions are
implemented with low power analog comparators. For example, one of the selectable
safety functions prevents the junction temperature from exceeding its limits by
automatically detuning the antenna. The overall system efficiency from the antenna input
to the DC-to-DC output reaches 86 %.
2. Features and benefits
25 V tolerant antenna input pins
Automatic over-voltage protection of the antenna inputs
6.78 MHz compatible integrated rectifier
High efficiency with an active rectifier and a DC-to-DC converter
AC input to DC-to-DC output efficiency exceeding 86 % at 6 to 9 W output
Integrated LDOs (1.8 V and 3.3 V up to 50 mA) with auto enable and discharge path
Integrated DC-to-DC buck regulator with 4.2 V to 10 V, 1.1 A output
Multi-channel 12-bit ADC subsystem
Temperature sensor (NTC) analog interface
USB bus power supply detection
400 kHz I2C-bus slave interface
Software and power-on reset of the on-chip digital controller
Programmable rectifier modes: active, half-active and passive
2 digital General Purpose Input and Output ports (GPIOs) with open-drain outputs and
up to 60 V tolerance for control and communication applications





SeitenGesamt 5 Seiten
PDF Download[ NX1WP10 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
NX1WP10A4WP compliant high frequency wireless charging receiver front endNXP Semiconductors
NXP Semiconductors

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche