DataSheet.es    


PDF VOL3120 Data sheet ( Hoja de datos )

Número de pieza VOL3120
Descripción 2.5A Output Current IGBT and MOSFET Driver
Fabricantes Vishay 
Logotipo Vishay Logotipo



Hay una vista previa y un enlace de descarga de VOL3120 (archivo pdf) en la parte inferior de esta página.


Total 10 Páginas

No Preview Available ! VOL3120 Hoja de datos, Descripción, Manual

www.vishay.com
VOL3120
Vishay Semiconductors
Low Profile, 2.5 A Output Current IGBT and MOSFET Driver
22677
A1
C2
Shield
5 VCC
4 VO
3 VEE
DESCRIPTION
The VOL3120 consists of an infrared light emitting diode
optically coupled to an integrated circuit with a power
output stage. This optocoupler is ideally suited for driving
power IGBTs and MOSFETs used in motor control and solar
inverter applications. The high operating voltage range of
the output stage provides the drive voltages required by
gate controlled devices. The voltage and current supplied
by this optocoupler makes it ideally suited for directly driving
high power IGBTs with ratings up to 1000 V / 100 A. The low
profile and small footprint of the VOL3120 makes it an ideal
choice for applications where board space and component
height are at a premium, while still offering a high degree of
isolation performance.
AGENCY APPROVALS
The safety application model number covering all products
in this datasheet is VOL3120. This model number should be
used when consulting safety agency documents.
• UL 1577
• cUL
• CQC
• DIN EN 60747-5-5 (VDE 0884-5)
FEATURES
• Industrial temperature range: -40 °C to +100 °C
• 2.5 mm low profile package
• Rated for reinforced insulation
• 2.5 A minimum peak output current
• 48 kV/μs minimum common mode rejection
(CMR) at VCM = 1500 V
• ICC = 2.5 mA maximum supply current
• Under voltage lock-out (UVLO) with hysteresis
• Wide operating VCC range: 15 V to 32 V
• Floor life: unlimited, MSL 1, according to J-STD-020
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Domestic appliance motor drives
• Welding equipment
• Variable speed motor drives
• Induction stove top
• Solar inverters
• Switch mode power supplies (SMPS)
• Uninterruptible power supplies (UPS)
ORDERING INFORMATION
VOL 3 1 2 0 - X0 0 # T
LSOP-5
PACKAGE
LSOP-5
PART NUMBER
PACKAGE OPTION
UL, cUL, CQC
VOL3120T
TAPE
AND
REEL
10.2 mm
UL, cUL, CQC, VDE
VOL3120-X001T
Rev. 1.5, 08-Jan-16
1 Document Number: 82656
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1 page




VOL3120 pdf
www.vishay.com
VOL3120
Vishay Semiconductors
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Climatic classification
According to IEC 68 part 1
40 / 100 / 21
Comparative tracking index
CTI 175
Maximum rated withstanding isolation voltage
Maximum transient isolation voltage
Maximum repetitive peak isolation voltage
Isolation resistance
Output safety power
Input safety current
Safety temperature
Creepage distance
t = 1 min
Tamb = 25 °C, VDC = 500 V
Tamb = 100 °C, VDC = 500 V
VISO
VIOTM
VIORM
RIO
RIO
PSO
ISI
TS
5300
8000
1050
1012
1011
900
250
175
8
VRMS
V
V
Ω
Ω
mW
mA
°C
mm
Clearance distance
8 mm
Insulation thickness
DTI 0.4 mm
Input to output test voltage, method B
VIORM x 1.875 = VPR, 100 % production test
with tM = 1 s, partial discharge < 5 pC
Input to output test voltage, method A
VIORM x 1.6 = VPR, 100 % production test
with tM = 10 s, partial discharge < 5 pC
Environment (pollution degree in accordance to DIN VDE 0109)
VPR
VPR
1969
1680
2
Vpeak
Vpeak
Note
• As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
100
10
1
1.0
1.2 1.4 1.6
VF - Forward Voltage (V)
1.8
Fig. 6 - Forward Current vs. Forward Voltage
0.0
VCC = 15 V to 32 V
-0.5 IF = 7 mA to 16 mA
IOUT = -100 mA
-1.0
-1.5
-2.0
-2.5
-3.0
-40 -20 0 20 40 60 80 100
Tamb - Ambient Temperature (°C)
Fig. 7 - High Level Voltage Drop vs. Ambient Temperature
Rev. 1.5, 08-Jan-16
5 Document Number: 82656
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

5 Page










PáginasTotal 10 Páginas
PDF Descargar[ Datasheet VOL3120.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
VOL31202.5A Output Current IGBT and MOSFET DriverVishay
Vishay

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar