|
|
PDF 74LCX07 Data sheet ( Hoja de datos )
| Número de pieza | 74LCX07 | |
| Descripción | Low-voltage CMOS hex buffer | |
| Fabricantes | STMicroelectronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 74LCX07 (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
74LCX07
Low-voltage CMOS hex buffer (open drain)
with 5 V tolerant inputs
Datasheet −production data
Features
■ 5 V tolerant inputs
■ High speed
– tPD = 5.2 ns (max.) at VCC = 3 V
■ Power-down protection on inputs and outputs
■ Symmetrical output impedance
– |IOH| = IOL = 24 mA (min.) at VCC = 3 V
■ PCI bus levels guaranteed at 24 mA
■ Operating voltage range
– VCC (opr.) = 2.0 V to 3.6 V
■ Pin and function compatible with 74 series 07
■ Latch-up performance exceeds 500 mA
(JESD 17)
■ ESD performance
– HBM: 2000 V (MIL STD 883 method 3015)
– MM: 200 V
– CDM: 1000 V
Applications
■ Automotive
■ Industrial
■ Computer
■ Consumer
TSSOP14
SO-14
Description
The 74LCX07 device is a low-voltage CMOS
open drain hex buffer manufactured with sub-
micron silicon gate and double-layer metal wiring
C2MOS technology. It is ideal for low-power and
high-speed 3.3 V applications and can be
interfaced to a 5 V signal environment for inputs.
The internal circuit is composed of 2 stages
including a buffer output, which provides high
noise immunity and stable output.
It has the same speed performance at 3.3 V as
the 5 V AC/ACT family, combined with lower
power consumption.
All inputs and outputs are equipped with
protection circuits against static discharge, giving
them 2 kV ESD immunity and transient excess
voltage.
Table 1. Device summary
Order code
Temperature range
Package
Packaging
Marking
74LCX07TTR
74LCX07YTTR(1)
74LCX07MTR
74LCX07YMTR(1)
-40/+85 °C
-40/+85 °C
-40/+85 °C
-40/+85 °C
TSSOP14
TSSOP14 (automotive grade)
SO-14
SO-14 (automotive grade)
Tape and reel
Tape and reel
Tape and reel
Tape and reel
LCX07
LCX07Y
74LCX07
74LCX07Y
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC
Q001 and Q002 or equivalent.
October 2012
This is information on a product in full production.
Doc ID 6818 Rev 8
1/16
www.st.com
16
1 page  
74LCX07
3 Maximum ratings
Maximum ratings
Stressing the device above the rating listed in Table 4: Absolute maximum ratings may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in Table 5: Recommended
operating conditions of this specification is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
Table 4.
Symbol
Absolute maximum ratings
Parameter
VCC Supply voltage
VI DC input voltage
VO DC output voltage (VCC = 0 V)
VO DC output voltage (high or low state)(1)
IIK DC input diode current
IOK DC output diode current(2)
IO DC output current
ICC DC supply current per supply pin
IGND DC ground current per supply pin
Tstg Storage temperature
TL Lead temperature (10 sec.)
1. IO absolute maximum rating must be observed.
2. VO < GND.
Value
-0.5 to +7.0
-0.5 to +7.0
-0.5 to +7.0
-0.5 to VCC + 0.5
-50
-50
± 50
± 100
± 100
-65 to +150
300
Unit
V
V
V
V
mA
mA
mA
mA
mA
°C
°C
Recommended operating conditions
Table 5. Recommended operating conditions
Symbol
Parameter
VCC
VI
VO
VO
IOH, IOL
IOH, IOL
dt/dv
Supply voltage(1)
Input voltage
Output voltage (VCC = 0 V)
Output voltage (high or low state)
High or low level output current (VCC = 3.0 to 3.6 V)
High or low level output current (VCC = 2.7 V)
Input rise and fall time(2)
1. Truth table guaranteed: 1.5 V to 3.6 V.
2. VIN from 0.8 V to 2 V at VCC = 3.0 V.
Value
2.0 to 3.6
0 to 5.5
0 to 5.5
0 to VCC
± 24
± 12
0 to 10
Unit
V
V
V
V
mA
mA
ns/V
Doc ID 6818 Rev 8
5/16
5 Page 
74LCX07
Figure 6. SO-14 package outline
Package information
Table 11. SO-14 package mechanical data
Dimensions
Symbol
mm
Min.
Typ.
Max.
Min.
A 1.35
A1 0.1
A2 1.10
1.75
0.25
1.65
0.053
0.004
0.043
B 0.33
C 0.19
0.51
0.25
0.013
0.007
D 8.55
E 3.8
8.75
4.0
0.337
0.150
e 1.27
H 5.8
6.2 0.228
h 0.25
0.50 0.010
L 0.4
1.27 0.016
k 0°
8° 0°
ddd 0.100
inch
Typ.
0.050
Max.
0.069
0.010
0.065
0.020
0.010
0.344
0.157
0.244
0.020
0.050
8°
0.004
Doc ID 6818 Rev 8
11/16
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet 74LCX07.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 74LCX00 | Low Voltage Quad 2-Input NAND Gate |  Fairchild Semiconductor |
| 74LCX00 | Low voltage CMOS QUAD 2-Input NAND gate |  ST Microelectronics |
| 74LCX00M | Low Voltage Quad 2-Input NAND Gate | Fairchild Semiconductor |
| 74LCX00MTC | Low Voltage Quad 2-Input NAND Gate with 5V Tolerant Inputs | Fairchild Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |