Datenblatt-pdf.com


IGCM06G60HA Schematic ( PDF Datasheet ) - Infineon

Teilenummer IGCM06G60HA
Beschreibung Control Integrated POwer System
Hersteller Infineon
Logo Infineon Logo 




Gesamt 16 Seiten
IGCM06G60HA Datasheet, Funktion
Control Integrated POwer
System (CIPOS™)
IGCM06G60HA
Datasheet
For Power Management Application
1
Ver. 1.1, 2014-06-01






IGCM06G60HA Datasheet, Funktion
CIPOS™ IGCM06G60HA
It is recommended for proper work of CIPOS™ not
to provide input pulse-width lower than 1us.
The integrated gate drive provides additionally a
shoot through prevention capability which avoids
the simultaneous on-state of two gate drivers of the
same leg (i.e. HO1 and LO1, HO2 and LO2, HO3
and LO3). When two inputs of a same leg are
activated, only former activated one is activated so
that the leg is kept steadily in a safe state.
A minimum deadtime insertion of typically 380ns is
also provided by driver IC, in order to reduce cross-
conduction of the external power switches.
VFO (Fault-output, Pin 14)
The VFO pin indicates a module failure in case of
under voltage at pin VDD or in case of triggered
over current detection at ITRIP.
VFO
VSS
VDD
RON,FLT from ITRIP -Latch
>1
from uv -detection
CIPOS™
Figure 5: Internal circuit at pin VFO
ITRIP (Over current detection function, Pin 15)
CIPOS™ provides an over current detection
function by connecting the ITRIP input with the
motor current feedback. The ITRIP comparator
threshold (typ. 0.47V) is referenced to VSS ground.
An input noise filter (typ: tITRIPMIN = 530ns) prevents
the driver to detect false over-current events.
Over current detection generates a shut down of all
outputs of the gate driver after the shutdown
propagation delay of typically 1000ns.
The fault-clear time is set to typical 65us.
VDD, VSS (Low side control supply and
reference, Pin 13, 16)
VDD is the low side supply and it provides power
both to input logic and to low side output power
stage. Input logic is referenced to VSS ground.
The under-voltage circuit enables the device to
operate at power on when a supply voltage of at
least a typical voltage of VDDUV+ = 12.1V is present.
The IC shuts down all the gate drivers’ power
outputs, when the VDD supply voltage is below
VDDUV- = 10.4V. This prevents the external power
switches from critically low gate voltage levels
during on-state and therefore from excessive power
dissipation.
VB(U,V,W) and VS(U,V,W) (High side supplies,
Pin 1 - 6)
VB to VS is the high side supply voltage. The high
side circuit can float with respect to VSS following
the external high side power device emitter voltage.
Due to the low power consumption, the floating
driver stage is supplied by integrated bootstrap
circuit.
The under-voltage detection operates with a rising
supply threshold of typical VBSUV+ = 12.1V and a
falling threshold of VBSUV- = 10.4V.
VS(U,V,W) provide a high robustness against
negative voltage in respect of VSS of -50V
transiently. This ensures very stable designs even
under rough conditions.
N (Low side common emitter, Pin 17 - 19)
The low side common emitter is available for current
measurement. It is recommended to keep the
connection to pin VSS as short as possible in order
to avoid unnecessary inductive voltage drops..
W, V, U (High side emitter and low side collector,
Pin 20 - 22)
These pins are motor U, V, W input pins
P (Positive bus input voltage, Pin 23)
The high side IGBT are connected to the bus
voltage. It is noted that the bus voltage does not
exceed 450 V.
Datasheet
6 Ver. 1.1, 2014-06-01

6 Page









IGCM06G60HA pdf, datenblatt
CIPOS™ IGCM06G60HA
Circuit of a Typical Application
Figure 8: Application circuit
Switching Times Definition
Figure 9: Switching times definition
Datasheet
12
Ver. 1.1, 2014-06-01

12 Page





SeitenGesamt 16 Seiten
PDF Download[ IGCM06G60HA Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
IGCM06G60HAControl Integrated POwer SystemInfineon
Infineon

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche