|
|
Teilenummer | IEEE1394 |
|
Beschreibung | Card User Manual | |
Hersteller | ETC | |
Logo | ||
Gesamt 12 Seiten IEEE 1394 Card
Version 1.0
??Windows 2000
When you plug the card into to your system, Windows 2000 will detect the addition of new
hardware and install files that it need. After few moments, the hardware can be used. You can
check your 1394 card from “Start My Computer (Click Mouse right button) Properties
Hardware Device Manager”.
5
6 Page Cable Types
There are two types of 1394/FireWire cable. One type, 6-pin to 6-pin, supplies power to the
device it connects to. The other type is 6-pin to 4-pin, for devices that are self-powered and do
not require power from the 1394/FireWire bus.
If you connect devices in a daisy chain and any device needs power from the cabling, all
cabling must be 6-pin to 6-pin. If you use a repeater, you can use either type.
Power Considerations
The 1394/FireWire bus provides limited electrical power through the connector cables, as
noted above. Some devices will have their own power supplies. Other devices may need more
power than is available from the bus and can be powered from a powered repeater.
Make sure to check the power requirements of any devices you plan to use before you connect
them. Consult the device documentation for this information and the connection instructions.
8.0 Troubleshooting
1. Q: Why the 1394 card can’t be detected?
A: Insert the 1394 card firmly into the PCI slot.
2. Q: Why the 1394 card has not been installed correctly?
A: IEEE 1394 is only fully supported in Windows 98 Second Edition, Windows ME,
Windows 2000 and Windows XP or later version. Please upgrade your system.
3. Q: Why the connected IEEE 1394 (Fire Wire) device can’t be detected?
A: Connect the FireWire cable correctly. Install the driver provided with your FireWire
device. Also see the instruction manual provided with the device. Maybe some software
need DirectX 8.1 for the best support for FireWire devices.
4. Q: Why no image is obtained form the camera in video software?
A: Connect the FireWire cable correctly to the camera and the 1394 card. Turn the camera
on before starting your video software. Select the camera in your video software and
select the necessary settings.
5. Q: Why no sound is obtained from the camera in video software?
A: Connect the camera’s sound output to the “LINE-IN” on your sound card.
11
12 Page | ||
Seiten | Gesamt 12 Seiten | |
PDF Download | [ IEEE1394 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
IEEE1394 | IEEE 1394/Device Bay ATSC DTV receiver | NXP Semiconductors |
IEEE1394 | Connector Series | Molex |
IEEE1394 | Card User Manual | ETC |
IEEE1395 | Connector Series | Molex |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |