Datenblatt-pdf.com

IZ7008 Schematic ( Datenblatt PDF ) - Integral

Teilenummer IZ7008
Beschreibung 8-BIT MICROCONTROLLER
Hersteller Integral
Logo Integral Logo 

Gesamt 17 Seiten
		
IZ7008 Datasheet, Funktion
IZ7008
8-BIT MICROCONTROLLER WITH LCD DRIVER
IZ7008 is one-chip 8-bit microcontroller made by CMOS technology. The
microcontroller is multi-purpose and can be used in electronic watch, data acquisition
systems, control systems. Low consumption power and full static CMOS logic allow to use
MC in independent systems with limited energy consumption.
Technical characteristics of IZ7008:
ALU bit capacity
RAM size
ROM size
RISC commands system
Stack depth
Interrupter
Maximum number of the controlled
LCD segments
– 8 bits
– 40 bytes
– 1,5 К of commands (16–bit instructions)
– 30 types of commands
– 7 levels
– from 8- inputs and three timers
– 128 (32 LCD control drivers
at multiplex levels
1/2,1/3,1/4)
Operation temperature range -20°С to +70 °С.
1






IZ7008 Datasheet, Funktion
7 0x02F
IZ7008
- L7,M7,H7
6

6 Page







IZ7008 pdf, datenblatt
IZ7008
Seven lower counter bits count in the beginning of zero semi-period of note. After reaching
the code equal to the contents of 7 lower bits of KT2 register, 7 lower bits of the counter are
cleared but the highest bit is switched into logic 1 and then the note second (unit) semi-
period is counted in the same way.
As a result on output the frequency of 65565Hz/2N is formed, where N is number from 2 to
127, set in 7 lower bits of register KT2. To form notes period with accuracy to one period of
input frequency 65565 Hz the following possibility is forseen. When setting in register KT2
the higher bit of KT register in logic 1 when counting the second (unit) semi-period at code
reaching, equal to the contents of 7 lower bits of register KT2, 1-6 bits of timer are set into 0,
but the lowest bit is set into 1 and, thus, the following zero semi-period of note is "cut" for one
period of input signal. In this case the frequency equal to 65565 Hz / (2N-1) can be formed.
Formed notes frequency (output T2_7) can be supplied on external output "AL" at set into 1
flag AL_EN in the state register R7.
On output "AL" output T2_7 is also applied (at set into 1 flag AL_EN) at the following state of
timers control register RFBO:
RFBO_7 RFBO_6 RFBO_5 RFBO_4 RFBO_3 RFBO_2 RFBO_1 RFBO_0
IN1-T3
IN0-T3
IN1-T2
IN0-T2 CLR-T3 CLR-T2
EN-T3
EN-T2
1011X0X1
In this mode T2 is clocked by external signal (RC-oscillator), Т3 by clearing signal Т2 («short»
pulse FrT2) , injection of the signal from output T2_7 on output «AL» is used for testing
(measurement of RC-oscillator frequency).
Configuration of timers may by the following
Contents of register
Input Т2
Interrupt
Input Т3
Interrupt
Note
RFB0
request flag
request flag
FR2 FR3
00000000
0(no count) 0 0(no count) 0 State after system reset
0000C3C2E3E2
FrT1
+
FrT1
+
0001C3C2E3E2
2048 Hz
+
FrT1
+
0100C3C2E3E2
FrT1
+ 2048 Hz +
0101C3C2E3E2
2048 Hz
+
2048 Hz
+
0010C3C2E3E2
65536 Hz
Set. inhibited
FrT1
+
Tune mode
0110C3C2E3E2
65536 Hz
Set. inhibited
2048 Hz
+
1110C3C2E3E2
65536 Hz
Set. inhibited
IN6
+
1010C3C2E3E2
Inhibited combination
1000XC32XE32
FrT1
Set. inhibited
FrT2
+
1001XC32XE32
2048 Hz
Set. inhibited
FrT2
+
0011C3C2E3E2
0(no count)
-
FrT1
+
0111C3C2E3E2
0(no count)
-
2048 Hz
+
1111C3C2E3E2
0(no count)
-
IN6
+
10110C320 E32
IN7
Set. inhibited
FrT2
+
10110C321 E32
IN6
Set. inhibited
FrT2
+
10111C32X E32
IN8
Set. inhibited
FrT2
+
E2 , E3 - bits (count enable) /(count inhibit) of timer 2 or 3
E32 bit (count enable) /(count inhibit) of timers 2 and 3 simultaneously
С2 , С3 - bits of clearing timer 2 or 3
С32 bit of clearing timers 2 and 3 simultaneously
12

12 Page


SeitenGesamt 17 Seiten
PDF Download[ IZ7008.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
IZ70088-BIT MICROCONTROLLERIntegral
Integral

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com    |   2018   |  Kontakt  |   Suche