Datenblatt-pdf.com


25L1606E Schematic ( PDF Datasheet ) - MXIC

Teilenummer 25L1606E
Beschreibung MX25L1606E
Hersteller MXIC
Logo MXIC Logo 




Gesamt 30 Seiten
25L1606E Datasheet, Funktion
MX25L8006E
MX25L1606E
MX25L8006E, MX25L1606E
DATASHEET
P/N: PM1548
REV. 1.2, JUL. 02, 2010
1






25L1606E Datasheet, Funktion
Status Register Feature
Electronic Identification
- JEDEC 1-byte manufacturer ID and 2-byte device ID
- RES command for 1-byte Device ID
- REMS commands for 1-byte manufacturer ID and 1-byte device ID
HARDWARE FEATURES
• PACKAGE
- 16-pin SOP (300mil), MX25L1606E only
- 8-pin SOP (150mil)
- 8-pin SOP (200mil)
- 8-pin PDIP (300mil)
- 8-land WSON (6x5mm)
- 8-land USON (4x4mm)
- All Pb-free devices are RoHS Compliant
MX25L8006E
MX25L1606E
GENERAL DESCRIPTION
The device feature a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus.
The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). Serial access
to the device is enabled by CS# input.
When it is in Dual Output read mode, the SI and SO pins become SIO0 and SIO1 pins for data output.
The device provides sequential read operation on whole chip.
After program/erase command is issued, auto program/ erase algorithms which program/ erase and verify the speci-
fied page or sector/block locations will be executed. Program command is executed on byte basis, or page basis, or
word basis for erase command is executes on sector, or block, or whole chip basis.
To provide user with ease of interface, a status register is included to indicate the status of the chip. The status read
command can be issued to detect completion status of a program or erase operation via WIP bit.
Advanced security features enhance the protection and security functions, please see security features section for
more details.
When the device is not in operation and CS# is high, it is put in standby mode.
The device utilizes Macronix's proprietary memory cell, which reliably stores memory contents even after typical
100,000 program and erase cycles.
P/N: PM1548
REV. 1.2, JUL. 02, 2010
6

6 Page









25L1606E pdf, datenblatt
MX25L8006E
MX25L1606E
Table 2. Protected Area Sizes
Status bit
BP2 BP1 BP0
000
001
010
011
100
101
110
111
Protect Level
MX25L8006E (8Mb)
0 (none)
1 (1block, block 15th)
2 (2blocks, block 14th-15th)
3 (3blocks, block 12th-15th)
4 (4blocks, block 8th-15th)
5 (All)
6 (All)
7 (All)
Status bit
Protect Level
BP3 BP2 BP1 BP0
MX25L1606E (16Mb)
0 0 0 0 0 (none)
0 0 0 1 1 (1block, block 31th)
0 0 1 0 2 (2blocks, block 30th-31th)
0 0 1 1 3 (4blocks, block 28th-31th)
0 1 0 0 4 (8blocks, block 24th-31th)
0 1 0 1 5 (16blocks, block 16th-31th)
0 1 1 0 6 (32blocks, all)
0 1 1 1 7 (32blocks, all)
1 0 0 0 8 (32blocks, all)
1 0 0 1 9 (32blocks, all)
1 0 1 0 10 (16blocks, block 0th-15th)
1 0 1 1 11 (24blocks, block 0th-23th)
1 1 0 0 12 (28blocks, block 0th-27th)
1 1 0 1 13 (30blocks, block 0th-29th)
1 1 1 0 14 (31blocks, block 0th-30th)
1 1 1 1 15 (32blocks, all)
P/N: PM1548
REV. 1.2, JUL. 02, 2010
12

12 Page





SeitenGesamt 30 Seiten
PDF Download[ 25L1606E Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
25L1606EMX25L1606EMXIC
MXIC

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche