Datenblatt-pdf.com


1PMT5933BT3 Schematic ( PDF Datasheet ) - Motorola Inc

Teilenummer 1PMT5933BT3
Beschreibung PLASTIC SURFACE MOUNT ZENER DIODES 2.5 WATTS 3.3.91 VOLTS
Hersteller Motorola Inc
Logo Motorola  Inc Logo 




Gesamt 6 Seiten
1PMT5933BT3 Datasheet, Funktion
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by 1PMT5913BT3/D
Product Preview
2.5 Watt Plastic Surface Mount
Silicon Zener Diodes
Powermite® Package
This complete new line of zener/tvs diodes offers a 2.5 watt series in a micro
miniature, space saving surface mount package. The Powermite zener/tvs
diodes are designed for use as a tvs or a regulation device in automotive and
telecommunication applications where efficiency, low leakage, size/height and
profile are important.
Features:
Voltage Range – 3.3 to 91 V
ESD Rating of Class 3 (> 16 kV) per Human Body Model
Low Profile – maximum height of 1.1mm
Integral Heat Sink/Locking Tabs
Full metallic bottom eliminates flux entrapment
Small Footprint – Footprint area of 8.45mm2
Supplied in 12mm tape and reel – 12,000 units per reel
Powermite is JEDEC Registered as DO–216AA
1PMT5913BT3
through
1PMT5948BT3
PLASTIC SURFACE MOUNT
ZENER DIODES
2.5 WATTS
3.3–91 VOLTS
1
2
CASE 457–01
PLASTIC
12
1: CATHODE
2: ANODE
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
DC Power Dissipation @ TL = 75°C, Measured at Zero Lead Length
Derate above 75°C
°PD°
2.5 °Watts°
40 mW/°C
DC Power Dissipation @ TA = 25°C(1)
Derate above 25°C
°PD°
380 °mW
2.8 mW/°C
Thermal Resistance from Junction to Lead
RθJL 26 °C/W
Thermal Resistance from Junction to Ambient
RθJA 324 °C/W
Operating and Storage Junction Temperature Range
Typical Ppk Dissipation @ TL < 25°C, (PW–10/1000 µs per Figure 8)(2)
TJ, Tstg
Ppk
– 65 to +150
200
°C
Watts
Typical Ppk Dissipation @ TL < 25°C, (PW–8/20 µs per Figure 9)(2)
Ppk
1000
Watts
(1)FR4 Board, within 1” to device, using Motorola minimum recommended footprint, as shown in case 403A outline dimensions spec.
(2)Non–repetitive current pulse.
This document contains preview information only and is subject to change without notice.
Powermite is a registered trademark of Microsemi Corporation.
Thermal Clad is a trademark of the Bergquist Company.
©1MPoMtoTro5la9,1In3cB. 1T9936through 1PMT5948BT3
MOTOROLA
1






1PMT5933BT3 Datasheet, Funktion
OUTLINE DIMENSIONS
–A–
S
C
J
F
0.08 (0.003) M T B S C S
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A DOES NOT INCLUDE MOLD FLASH,
PROTRUSIONS OR GATE BURRS. MOLD FLASH,
PROTRUSIONS OR GATE BURRS SHALL NOT
EXCEED 0.15 (0.006) PER SIDE.
–B–
K
R
J
L
TERM. 1 CATHODE
TERM. 2 ANODE
MILLIMETERS
INCHES
DIM MIN MAX MIN MAX
A 1.75 2.15 0.069 0.081
B 1.75 2.15 0.069 0.086
C 0.85 1.15 0.033 0.045
D 0.40 0.65 0.016 0.026
F 0.70 1.00 0.028 0.039
H –0.05 +0.10 –0.002 +0.004
J 0.10 0.25 0.004 0.010
K 3.60 4.15 0.142 0.163
L 0.50 0.80 0.020 0.031
R 1.20 1.50 0.047 0.059
S 0.50 REF
0.020
H
–T–
D
0.08 (0.003) M T B S C S
CASE 457–01
ISSUE O
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
How to reach us:
USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454
MFAX: [email protected] – TOUCHTONE 602–244–6609
INTERNET: http://Design–NET.com
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,
3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
MOTOROLA
6
*1PMT5913BT3/D*1PMT5913BT3/D
1PMT5913BT3 through 1PMT5948BT3

6 Page







SeitenGesamt 6 Seiten
PDF Download[ 1PMT5933BT3 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
1PMT5933BT3PLASTIC SURFACE MOUNT ZENER DIODES 2.5 WATTS 3.3.91 VOLTSMotorola  Inc
Motorola Inc

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche