|
|
Teilenummer | iQL48060A033V |
|
Beschreibung | DC/DC Power Modules | |
Hersteller | TDK | |
Logo | ||
Gesamt 16 Seiten Data Sheet: AscetaTM iQL Series –Single Output Quarter Brick
Asceta™ iQL Series DC/DC Power Modules
48V Input, 3.3V / 60A /198W Output
Quarter Brick
The Asceta™ power module series provides
exceptionally high true useable power in an
industry standard quarter brick format. Its
91% full load efficiency (92% at 70% load)
and superior thermal performance make the
Asceta series of DC-DC converters is ideally
suited for tight space, power-hungry, and
thermal challenging distributed power
architectures in demanding thermal
environments. This rugged building block is
designed to serve as the core of your high
reliability system. A wide output voltage trim
range, -20 to +10%, and remote sensing are
standard feature enhancing versatility.
Standard Features:
• RoHS Compliant
• Standard Quarter Brick
• Nominal Size: 2.28” × 1.45” × 0.5”
(57.9mm × 36.8mm × 12.7mm)
• Up to 60A of output current
• Output power – up to 198W
• Power density: 120W / in3
• Efficiency – up to 93%
• Full load efficiency at 48V input: 91%
• Efficiency at 70% load and 48V input: 92%
• Single board design with high usable power
47A at 65°C, 200LFM (no base-plate)
51A at 65°C, 200LFM (with base-plate)
• Industry standard output voltage trim
• Remote sense
• Basic insulation – 1500Vdc
• Negative remote on/off logic
• Monotonic start-up into a pre-biased output
• Constant switching frequency
• Auto-recovery protection for input UVP
• Auto-recovery over-current protection
• Auto-recovery over-temperature protection
• Latched over-voltage protection
• UL 60950 (US and Canada), VDE 0805,
CB scheme (IEC950)
• CE Mark (EN60950)
• EMI: CISPR 22 A or B with external filter
• Multiple patents
• ISO Certified manufacturing facilities
Optional Features:
• Positive remote on/off logic
• Latched over-current protection
• Latched over-temperature protection
• Auto-recovery OVP
• 3.68 mm (0.145”) Thru-hole pins
• Base-plate option
©2010 TDK Innoveta Inc.
iQL 3.3V/60A Datasheet Rev 1.7 1/6/2010
℡ (877) 498-0099
1/16
Data Sheet: AscetaTM iQL Series –Single Output Quarter Brick
Electrical Characteristics: iQL48060A033V-000 through -0x9: 3.3V, 60A, 198W Output
95
90
85
80
75
70
65
0 5 10 15 20 25 30 35 40 45 50 55 60
Output Current (A)
Vin = 36V Vin = 48V Vin = 75V Vin = 60V
Efficiency vs. Input Voltage at Ta=25C, (test in socket)
24
21
18
15
12
9
6
3
0
0 5 10 15 20 25 30 35 40 45 50 55 60
Output Current (A)
Vin = 36V
Vin = 48V
Vin = 75V
Vin = 60V
Power Dissipation vs. Input Voltage at Ta=25C
Start-up from on/off Switch at 48V input and Full Load.
Ch. 1: Vo Ch. 2: ON/OFF Ch. 4: Io
Typical Output Ripple at 48V Input and Full Load at
Ta=25C
Ch. 1: Vo
Start-up from Input Voltage Application at Full Load.
Ch. 1: Vo
Ch. 2: Io
Ch. 3: Vin
Load Transient Response. Load Step from 50% to 75%
of Full Load with di/dt= 0.1A/uS. Ch. 1: Vo Ch. 2: Io
©2010 TDK Innoveta Inc.
iQL 3.3V/60A Datasheet Rev 1.7 1/6/2010
℡ (877) 498-0099
6/16
6 Page Data Sheet: AscetaTM iQL Series –Single Output Quarter Brick
Operating Information:
Over-Current Protection: The power
modules have current limit protection to
protect the module during output overload
and short circuit conditions. During overload
conditions, the power modules may protect
themselves by entering a hiccup current limit
mode. The modules will operate normally
once the output current returns to the
specified operating range. A latched over-
current protection option is also available.
Consult the TDK Innoveta technical support
for details.
Output Over-Voltage Protection: The
power modules have a control circuit,
independent of the main control loop, that
reduces the risk of over voltage appearing at
the output of the power module during a
fault condition. If there is a fault in the main
regulation loop, the over voltage protection
circuitry will latch the power module off once
it detects the output voltage condition as
specified on the Electrical Data page. To
remove the module from the latched
condition, either cycle the input power or
toggle the remote ON/OFF pin providing that
over-voltage conditions have been removed.
The reset time of the ON/OFF pin should be
500ms or longer.
An optional non-latching OVP protection
feature is also available. Consult the TDK
Innoveta technical support for details.
Thermal Protection: When the power
modules exceed the maximum operating
temperature, the modules will turn-off to
safeguard the units against thermal damage.
The module will auto restart as the unit is
cooled below the over temperature
threshold. A latched over-temperature
protection option is also available. Consult
the TDK Innoveta technical support for
details.
Remote On/Off: - The power modules have
an internal remote on/off circuit. The user
must supply an open-collector or compatible
switch between the Vin(-) pin and the on/off
pin. The maximum voltage generated by
the power module at the on/off terminal is
15V. The maximum allowable leakage
current of the switch is 50uA. The switch
must be capable of maintaining a low signal
Von/off < 0.8V while sinking 400uA.
The standard on/off logic is negative logic.
The module will turn on if pin 2 is connected
to pin 3, and it will be off if pin 2 is left open.
If the negative logic feature is not being
used, pin 2 should be shorted to pin 3.
An optional positive logic is available. The
power module will turn on if pin 2 is left open
and will be off if pin 2 is connected to pin 3.
If the positive logic circuit is not being used,
terminal 2 should be left open.
©2010 TDK Innoveta Inc.
iQL 3.3V/60A Datasheet Rev 1.7 1/6/2010
℡ (877) 498-0099
12/16
12 Page | ||
Seiten | Gesamt 16 Seiten | |
PDF Download | [ iQL48060A033V Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
iQL48060A033V | DC/DC Power Modules | TDK |
iQL48060A033V-003-R | 72-308W Quarter Brick Converter | TDK |
iQL48060A033V-009-R | 72-308W Quarter Brick Converter | TDK |
iQL48060A033V-0B9-R | 72-308W Quarter Brick Converter | TDK |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |