Datenblatt-pdf.com


A1015L Schematic ( PDF Datasheet ) - Toshiba Semiconductor

Teilenummer A1015L
Beschreibung Silicon PNP Epitaxial Type Transistor
Hersteller Toshiba Semiconductor
Logo Toshiba Semiconductor Logo 




Gesamt 3 Seiten
A1015L Datasheet, Funktion
2SA1015(L)
TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT process)
2SA1015(L)
Audio Frequency Amplifier Applications
Low Noise Amplifier Applications
High voltage and high current: VCEO = 50 V (min),
IC = 150 mA (max)
Excellent hFE linearity: hFE (2) = 80 (typ.) at VCE = 6 V, IC = 150 mA
: hFE (IC = 0.1 mA)/hFE (IC = 2 mA) = 0.95 (typ.)
Low noise: NF = 0.2dB (typ.) (f = 1 kHz)
Complementary to 2SC1815 (L)
Unit: mm
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO 50 V
Collector-emitter voltage
VCEO 50 V
Emitter-base voltage
VEBO 5 V
Collector current
IC
150
mA
Base current
IB 50 mA
Collector power dissipation
PC 400 mW
Junction temperature
Storage temperature range
Tj 125 °C
Tstg
55~125
°C
JEDEC
JEITA
TO-92
SC-43
Note: Using continuously under heavy loads (e.g. the application of high
TOSHIBA
temperature/current/voltage and the significant change in temperature,
2-5F1B
etc.) may cause this product to decrease in the reliability significantly Weight: 0.21 g (typ.)
even if the operating conditions (i.e. operating
temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Collector cut-off current
ICBO
VCB = −50 V, IE = 0
Emitter cut-off current
IEBO
VEB = −5 V, IC = 0
DC current gain
hFE (1)
(Note)
VCE = −6 V, IC = −2 mA
hFE (2) VCE = −6 V, IC = −150 mA
Collector-emitter saturation voltage
VCE (sat) IC = −100 mA, IB = −10 mA
Base-emitter saturation voltage
VBE (sat) IC = −100 mA, IB = −10 mA
Transition frequency
fT VCE = −10 V, IC = −1 mA
Collector output capacitance
Cob
VCB = −10 V, IE = 0
f = 1 MHz
Base intrinsic resistance
rbb’
VCB = −10 V, IE = 1 mA
f = 30 MHz
Noise figure
NF (1)
NF (2)
VCE = −6 V, IC = −0.1 mA
f = 100 Hz, RG = 10 kΩ
VCE = −6 V, IC = −0.1 mA
f = 1 kHz, RG = 10 kΩ
Note: hFE (1) classification O: 70~140, Y: 120~240, GR: 200~400
Min Typ. Max Unit
⎯ ⎯ −0.1 μA
⎯ ⎯ −0.1 μA
70 400
25 80
⎯ −0.1 0.3 V
⎯ ⎯ −1.1 V
80 ⎯ ⎯ MHz
4
7 pF
30
Ω
0.5
6
dB
0.2
3
1 2007-11-01





SeitenGesamt 3 Seiten
PDF Download[ A1015L Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
A1015Photo InterruptersPanasonic Semiconductor
Panasonic Semiconductor
A1015PNP general purpose transistorNXP Semiconductors
NXP Semiconductors
A101550V, 150mA, Silicon PNP Epitaxial Type TransistorToshiba Semiconductor
Toshiba Semiconductor
A1015150mA,50V, PNP TRANSISTOR, 2SA1015Unisonic Technologies
Unisonic Technologies
A1015LOW FREQUENCY AMPLIFIERFairchild Semiconductor
Fairchild Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche