|
|
PDF S-1335 Data sheet ( Hoja de datos )
| Número de pieza | S-1335 | |
| Descripción | HIGH RIPPLE-REJECTION SOFT-START FUNCTION CMOS VOLTAGE REGULATOR | |
| Fabricantes | Seiko | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de S-1335 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
S-1335 Series
www.sii-ic.com
© Seiko Instruments Inc., 2012-2014
HIGH RIPPLE-REJECTION SOFT-START FUNCTION
CMOS VOLTAGE REGULATOR
Rev.1.3_00
The S-1335 Series, developed by using the CMOS technology, is a positive voltage regulator IC of 150 mA output current,
which has low dropout voltage, high-accuracy output voltage and soft-start function.
The rising time of output voltage immediately after power-on or after the ON / OFF pin is set to ON is adjustable. A 1.0 μF
small ceramic capacitor can be used. It operates with low current consumption of 36 μA typ. Furthermore the overcurrent
protection circuit prevents the load current from exceeding the capacity of output transistor.
SOT-23-5, SC-82AB and super small HSNT-4 (1010) packages realize high-density mounting.
Features
• Output voltage:
• Input voltage:
• Output voltage accuracy:
• Dropout voltage:
• Current consumption:
• Output current:
• Input and output capacitors:
• Ripple rejection:
• Built-in soft-start circuit:
• Built-in overcurrent protection circuit:
• Built-in ON / OFF circuit:
• Pull-down resistor is selectable.
• Discharge shunt function is selectable.
• Operation temperature range:
• Lead-free (Sn 100%), halogen-free
1.0 V to 3.6 V, selectable in 0.05 V step
1.5 V to 5.5 V
±1.0% (1.0 V to 1.45 V output product: ±15 mV)
70 mV typ. (2.8 V output product, IOUT = 100 mA)
During operation: 36 μA typ., 54 μA max.
During power-off: 0.1 μA typ., 1.0 μA max.
Possible to output 150 mA (VIN ≥ VOUT(S) + 1.0 V)*1
A ceramic capacitor of 1.0 μF or more can be used.
70 dB typ. (f = 10 kHz, VOUT(S) ≤ 2.5 V)
80 dB typ. (f = 1.0 kHz)
The rising time of output voltage immediately after power-on or after the
ON / OFF pin is set to ON is adjustable.
The soft-start time of SOT-23-5 can be switched to tSS0 = 0.1 ms typ. /
tSS1 = 1.0 ms typ. with the SST pin.
The soft-start time of SC-82AB is fixed to tSS0 = 0.1 ms typ.
The soft-start time of HSNT-4 (1010) is fixed to either tSS0 = 0.1 ms typ.
or tSS1 = 1.0 ms typ.
Limits overcurrent of output transistor.
Ensures long battery life.
Ta = −40°C to +85°C
*1. Attention should be paid to the power dissipation of the package when the output current is large.
Applications
• Constant-voltage power supply for digital still camera, TV
• Constant-voltage power supply for battery-powered device
• Constant-voltage power supply for cellular phone
• Constant-voltage power supply for portable equipment
Packages
• SOT-23-5
• SC-82AB
• HSNT-4 (1010)
Seiko Instruments Inc.
1
1 page  
HIGH RIPPLE-REJECTION SOFT-START FUNCTION CMOS VOLTAGE REGULATOR
Rev.1.3_00
S-1335 Series
7. S-1335 Series L type
VIN
SST
ON / OFF
*1
Soft-start
circuit
ON / OFF
circuit
Overcurrent
protection
circuit
+
−
VOUT
Function
ON / OFF logic
Discharge shunt
function
Pull-down resistor
Soft-start time
(typ.)
Status
Active "H"
Unavailable
Available
0.1 ms / 1.0 ms
(Switchable)
Reference
voltage circuit
VSS
*1. Parasitic diode
Figure 7
8. S-1335 Series M type
VIN
SST
ON / OFF
*1
Soft-start
circuit
ON / OFF
circuit
Overcurrent
protection
circuit
+
−
Reference
voltage circuit
VOUT
Function
ON / OFF logic
Discharge shunt
function
Pull-down resistor
Soft-start time
(typ.)
Status
Active "H"
Unavailable
Unavailable
0.1 ms / 1.0 ms
(Switchable)
VSS
*1. Parasitic diode
Figure 8
Seiko Instruments Inc.
5
5 Page 
HIGH RIPPLE-REJECTION SOFT-START FUNCTION CMOS VOLTAGE REGULATOR
Rev.1.3_00
S-1335 Series
4. 5 S-1335 Series E type
ON / OFF logic:
Discharge shunt function:
Pull-down resistor:
Soft-start time:
Active "H"
Available
Available
1.0 ms typ.
Table 7
Remark
Output Voltage
HSNT-4 (1010)
1.0 V ± 15 mV
1.1 V ± 15 mV
1.2 V ± 15 mV
1.3 V ± 15 mV
1.4 V ± 15 mV
1.5 V ± 1.0%
1.6 V ± 1.0%
1.7 V ± 1.0%
1.8 V ± 1.0%
1.9 V ± 1.0%
2.0 V ± 1.0%
2.1 V ± 1.0%
2.2 V ± 1.0%
2.3 V ± 1.0%
2.4 V ± 1.0%
2.5 V ± 1.0%
2.6 V ± 1.0%
2.7 V ± 1.0%
2.8 V ± 1.0%
2.85 V ± 1.0%
2.9 V ± 1.0%
3.0 V ± 1.0%
3.1 V ± 1.0%
3.2 V ± 1.0%
3.3 V ± 1.0%
3.4 V ± 1.0%
3.5 V ± 1.0%
3.6 V ± 1.0%
S-1335E10-A4T2U3
S-1335E11-A4T2U3
S-1335E12-A4T2U3
S-1335E13-A4T2U3
S-1335E14-A4T2U3
S-1335E15-A4T2U3
S-1335E16-A4T2U3
S-1335E17-A4T2U3
S-1335E18-A4T2U3
S-1335E19-A4T2U3
S-1335E20-A4T2U3
S-1335E21-A4T2U3
S-1335E22-A4T2U3
S-1335E23-A4T2U3
S-1335E24-A4T2U3
S-1335E25-A4T2U3
S-1335E26-A4T2U3
S-1335E27-A4T2U3
S-1335E28-A4T2U3
S-1335E2J-A4T2U3
S-1335E29-A4T2U3
S-1335E30-A4T2U3
S-1335E31-A4T2U3
S-1335E32-A4T2U3
S-1335E33-A4T2U3
S-1335E34-A4T2U3
S-1335E35-A4T2U3
S-1335E36-A4T2U3
Please contact our sales office for products with specifications other than the above.
Seiko Instruments Inc.
11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet S-1335.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| S-1334-CE | 1300 SERIES RECTANGULAR CONNECTORS |  Hirose Electric |
| S-1334-CT | 1300 SERIES RECTANGULAR CONNECTORS | Hirose Electric |
| S-1334-H | 1300 SERIES RECTANGULAR CONNECTORS | Hirose Electric |
| S-1334-SB | 1300 SERIES RECTANGULAR CONNECTORS | Hirose Electric |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |