Datenblatt-pdf.com


UPC358GR-9LG Schematic ( PDF Datasheet ) - NEC

Teilenummer UPC358GR-9LG
Beschreibung SINGLE POWER SUPPLY DUAL OPERATIONAL AMPLIFIERS
Hersteller NEC
Logo NEC Logo 




Gesamt 12 Seiten
UPC358GR-9LG Datasheet, Funktion
DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUIT
μ PC1251GR-9LG, μ PC1251MP-KAA, μ PC358GR-9LG
www.datasheet4u.com SINGLE POWER SUPPLY DUAL OPERATIONAL AMPLIFIERS
<R> DESCRIPTION
The μ PC1251GR-9LG, μ PC1251MP-KAA, μ PC358GR-9LG are dual operational amplifiers which are designed to
operate for a single power supply. It includes features of low-voltage operation, a common-mode input voltage that
range from V(GND) level, an output from a V(GND) level that is determined by the output stage of class C push-
pull circuit and a 50 μA(TYP.) constant current, and a low current consumption.
In addition, this can operate at both positive and negative power supply and it can be extensively used in various
amplifier circuits.
The μ PC1251GR-9LG, μ PC1251MP-KAA which expands temperature type is suited for wide operating ambient
temperature use, and μ PC358GR-9LG is used for general purposes.
A DC parameter selection that is compatible to operational amplifiers is also available.
μ PC451GR-9LG, μ PC324GR-9LG which are quad types with the same circuit configuration are also available as
series of operational amplifiers.
<R> FEATURES
• Input Offset Voltage
±2 mV (TYP.)
• Internal frequency compensation
• Input Offset Current
±5 nA (TYP.)
• Output short-circuit protection
• Large Signal Voltage Gain 100000 (TYP.)
• Small Package
The mounting area is reduced to 40% or 66% compared to the conventional 8-pin plastic SOP as shown in the
following diagram.
Package
Subject part number
Outline comparison
Standard SOP
μ PC1251G2,
μ PC358G2
TSSOP
μ PC1251GR-9LG,
μ PC358GR-9LG
TSSOP (2.8 x 2.9)
μ PC1251MP-KAA
(Mounting area ratio)
6.5 4.4
6.4
5.2
(100%)
3.15
(60%)
2.8 4.0
2.9
(34%)
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. G17929EJ3V0DS00 (3rd edition)
Date Published December 2007 NS
2006, 2007
Printed in Japan
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.






UPC358GR-9LG Datasheet, Funktion
μ PC1251GR-9LG, μ PC1251MP-KAA, μ PC358GR-9LG
70
60
www.datasheet4u.com
50
IO SHORT vs. TA
IO SHORT
+
AV vs. V+
160
RL = 20 kΩ
120
2 kΩ
80
40 40
30
-20
0
20 40 60
80
TA - Operating Ambient Temperature - °C
0
0 10 20 30 40
V+ - Power Supply Voltage - V (V= GND)
AV, φ vs. f
140
120 V± = ±15 V
100
±7.5 V
80
±2.5 V
60
AV
40
20
0
0.1
1
10 100 1 k
f - Frequency - Hz
±15 V
φ
±7.5 V
±2.5 V
10 k 100 k 1 M
VO vs. f
20
100 kΩ
1 kΩ +15 V
15 VO
+7 V +
VIN 2 kΩ
10
5
0
1k
3 5 10 k 30 50 100 k 3005001 M
f - Frequency - Hz
120
100
80
60
40
20
0
100
CMR vs. f
1 k 10 k 100 k
f - Frequency - Hz
1M
6 Data Sheet G17929EJ3V0DS

6 Page









UPC358GR-9LG pdf, datenblatt
μ PC1251GR-9LG, μ PC1251MP-KAA, μ PC358GR-9LG
www.datasheet4u.com
The information in this document is current as of December, 2007. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1

12 Page





SeitenGesamt 12 Seiten
PDF Download[ UPC358GR-9LG Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
UPC358GR-9LGSINGLE POWER SUPPLY DUAL OPERATIONAL AMPLIFIERSNEC
NEC

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche