|
|
PDF PX-24G5Me-72 Data sheet ( Hoja de datos )
| Número de pieza | PX-24G5Me-72 | |
| Descripción | SATA 6.0 Gb/s Solid State Drive | |
| Fabricantes | PLEXTOR | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PX-24G5Me-72 (archivo pdf) en la parte inferior de esta página. Total 27 Páginas | ||
|
No Preview Available !
PX-xxG5Me-72
Model
PX-16G5Me-72
PX-24G5Me-72
PX-32G5Me-72
mSATA (JEDEC MO-300)
SATA 6.0 Gb/s Solid State Drive
Product Specification
(for Advantech)
Manual Rev.:
Revision Date:
Rev1.1
2013/08/12
LITE-ON IT CORPORATION
1 page  
1 Introduction
1.1 Overview :
The PX-xxG5Me MLC series mSATA 6 Gb/s Solid State Drive (mSATA SSD) delivers leading performance in an
industry standard JEDEC MO-300 form factor while simultaneously improving system responsiveness for mobile
applications over standard rotating drive media or hard disk drives. By combining leading NAND flash memory
technology with our innovative high performance firmware, LITEON IT delivers a SSD for native Serial Advanced
Technology Attachment (SATA) hard disk drive drop-in replacement with enhanced performance, reliability,
ruggedness and power savings. Since there are no rotating platters, moving heads, fragile actuators, or
unnecessary delays due to spin-up time or positional seek time that can slow down the storage subsystem,
significant I/O and throughput performance improvement is achieved as compared to rotating media or hard
disk drives. This document describes the specifications of the PX-xxG5Me MLC series mSATA SSD in JEDEC MO-
300 form factors.
The PX-xxG5Me mSATA SSD primarily targets mSATA based laptop PCs, highly rugged mobile client devices, as
well as thin and light mini/sub-notebooks. Key attributes include high performance, low power, increased
system responsiveness, high reliability, and enhanced ruggedness as compared to standard mobile mSATA hard
drives. The PX-xxG5Me mSATA SSD is available in JEDEC MO-300 form factor that are electrically, mechanically,
and software compatible with existing JEDEC MO-300 Serial ATA slots. Our flexible design allows
interchangeability with existing mobile hard drives based on the mSATA interface standard.
1.2 Product Specification
1.2.0 Key Component and FW Version
1.2.0.1 Flash: Toshiba TC58TEG6DDJTA00
1.2.0.2 Controller: Marvel Monet Lite 9188
1.2.0.3 FW Version: FW Version: V1.01 – 16/24GB, V1.00-32GB
1.2.1. Form Factor: JEDEC MO-300 mSATA SSD form factor
1.2.2. Capacity: available now
16GB (PX-16G5Me)
24GB (PX-24G5Me)
32GB (PX-32G5Me)
Table 1 User Addressable Sectors
Unformatted capacity
Total user addressable sectors
in LBA mode
16GB
31,277,232
24GB
46,905,264
32GB
62,533,296
Notes: 1. 1GB=1,000,000,000 bytes and not all of the memory can be used for storage.
2. 1 Sector = 512 bytes
Product Specification
Page 5 of 27
5 Page 
1.2.14. Electromagnetic Immunity
Electromagnetic Immunity tests assume the SSD is properly installed in the representative host system. The
drive operates properly without errors degradation in performance when subjected to radio frequency (RF)
environments defined in the following table.
Table 12 Radio Frequency Specifications
Test
Description
Performance criteria Reference standard
Electrostatic discharge
Contact ±4KV
Air: ±8KV
A IEC 61000-4-2:2008
Electrostatic discharge
Contact ±6KV
Air: ±12KV
B IEC 61000-4-2:2008
Electrostatic discharge
Contact ±8KV
Air: ±15KV
C IEC 61000-4-2:2008
80~1000MHz, 3V/m,
80% AM with 1 KHz sine
Radiated RF immunity 900 MHz, 3 V/m, 50%
A IEC 61000-4-3:2008
pulse modulation at
200Hz
Electrical fast transient
±1KV on AC mains
±0.5KV on external I/O
IEC 61000-4-4:2004
B +Corr.1:2006
+Corr.2:2007
Surge immunity
±1KV differential ±2KV
common, AC mains
B IEC 61000-4-5:2005
Conducted RF immunity
150KHz~80 MHz, 3 Vrms,
80% AM with 1KHz sine
A
IEC 61000-4-6:2008
Power frequency
magnetic field
50Hz, 1A/m (r.m.s.)
A IEC 61000-4-6:2008
Notes:
1.
2.
3.
4.
Performance criterion A = The device shall continue to operate as intended, i.e.,
normal unit operation with no degradation of performance.
Performance criterion B = The device shall continue to operate as intended after
completion of test, however, during the test, some degradation of performance is
allowed as long as there is no data loss operator intervention to restore device
function.
Performance criterion C = Temporary loss of function is allowed. Operator
intervention is acceptable to restore device function.
Contact electrostatic discharge is applied to drive enclosure.
1.2.15. Weight: 9 g Max.
1.2.16. Dimension:
50.8 mm x 29.8mm x 3.6 mm (L x W x H)
Product Specification
Page 11 of 27
11 Page | ||
| Páginas | Total 27 Páginas | |
| PDF Descargar | [ Datasheet PX-24G5Me-72.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PX-24G5Me-72 | SATA 6.0 Gb/s Solid State Drive | PLEXTOR |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |