|
|
PDF NJBK5 Data sheet ( Hoja de datos )
| Número de pieza | NJBK5 | |
| Descripción | Motor Controller | |
| Fabricantes | CHiNT | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NJBK5 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
Relay
Protection Relay
NJBK5 Motor Controller
1. General
NJBK5 series motor controller (hereinafter referred to as
controller) is mainly used in circuits with a frequency of AC
50Hz (or 60Hz), a rated operational voltage of up to 380V
and a rated control power of up to 11kW (current up to
22A) to control the direct start and stop of water pumps or
motors, provide motors with overload and phase failure
protection, and realize automatic liquid level control for
civil water towers and reservoirs.
This product is not applicable to the liquid level control
of low-conductivity liquids, such as oil, purified water,
inflammable and explosive chemical liquids and high-
density sewage.
Standards: IEC 60947-4-1.
2. Type designation
N JBK 5 - □ □ / □ □
Rated operational current
Rated control supply voltage
Function code
Blank: with liquid level relay
D: without liquid level relay
10: frame size code
Design sequence No.
Motor controller
Company code
3. Operation conditions
3.1 Altitude: the altitude of the mounting location should not
exceed 2000m;
3.2 Ambient tempeature: -5℃~+40℃, and the average
temperature in 24h should not exceed +35℃；
3.3 Atmospheric conditions: The relative air humidity at the
mounting location should not exceed 50% at the maximum
temperature of +40℃. The relative humidity may be higher at
lower temperatures. Special measures should be taken if
condensation occurs on the product occasionally due to
temperature variation;
3.4 Pollution degree: 3;
3.5 Mounting category: Ⅲ;
3.6 In places where there is no significant vibration or impact;
3.7 In non-explosive media that do not contain a sufficient
amount of gas or dust to cause metal corrosion or insulation
failure;
3.8 In places where rain and snow protection is provided;
3.9 The inclination from the vertical plane should not exceed 5°.
I
> >> I-10
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet NJBK5.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NJBK2 | Motor Protection Relay | CHiNT |
| NJBK5 | Motor Controller | CHiNT |
| NJBK5-5 | Motor Controller | CHiNT |
| NJBK6 | Motor Protection Relay | CHiNT |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |