Datenblatt-pdf.com


SC-AKX18 Schematic ( PDF Datasheet ) - Panasonic

Teilenummer SC-AKX18
Beschreibung CD Stereo System Owner Manual
Hersteller Panasonic
Logo Panasonic Logo 




Gesamt 20 Seiten
SC-AKX18 Datasheet, Funktion
Owner’s Manual
CD Stereo System
Model No. SC-AKX18
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.
If you have any questions, visit: www.panasonic.com/support
Register online at www.panasonic.com/register (U.S. customers only)
La referencia rápida en español se puede encontrar en la página 17.
P
RQT9899-P






SC-AKX18 Datasheet, Funktion
Connections
Connect the AC power supply cord only after all the other connections have been made.
2
3
A
B
1
To household AC outlet
1 Connect the FM indoor antenna.
Put the antenna where there is the best reception.
2 Connect the speakers.
3 Connect the AC power supply cord.
Do not use an AC power supply cord from other
equipment.
Conserving power
The system consumes a small amount of power even
when it is in standby mode. Disconnect the power
cord if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to reset them.
6

6 Page









SC-AKX18 pdf, datenblatt
Clock and timers
Setting the clock
This is a 12-hour clock.
1 Press [SETUP] to select “CLOCK”.
2 Press [R, T] to set the time and then press [OK].
To check the time
Press [SETUP] to select “CLOCK” and the press [OK].
In standby mode, press [DISPLAY].
Note:
Reset the clock regularly to maintain accuracy.
Sleep timer
The sleep timer turns off the system after the set time.
1 Press [SETUP] to select “SLEEP”.
2 Press [R, T] to select the setting (in minutes) and
then press [OK].
To cancel, select “OFF”.
Note:
• The remaining time is always shown on the display. The
display changes temporarily when you perform other
operations.
• The play and sleep timer can be used together.
• The sleep timer always comes first. Be sure not to set an
overlapping time.
Play timer
(Except for Bluetooth® source)
You can set the timer to come on at a certain time to
wake you up.
Preparation
Set the clock.
1 Press [SETUP] to select “TIMER ADJ”.
2 Press [R, T] to set the start time and then press
[OK].
3 Re-do step 2 to set the end time.
4 Press [R, T] to select the source you want to play
and then press [OK].
To start the timer
1 Press [SETUP] to select “TIMER SET”.
2 Press [R, T] to select “SET” and then press [OK].
#” is shown.
To cancel, select “OFF”.
The system must be turned off for the timer to
operate.
To check the setting
Press [SETUP] to select “TIMER ADJ” and then press
[OK].
In standby mode, press [DISPLAY] two times.
Note:
• The timer starts at a low volume and increases gradually to
the preset level.
• The timer comes on at the set time every day.
• If you turn off the system and then turn on again while the
timer is in operation, the timer will not stop at the end time.
12

12 Page





SeitenGesamt 20 Seiten
PDF Download[ SC-AKX18 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
SC-AKX18CD Stereo System Owner ManualPanasonic
Panasonic
SC-AKX18CD Stereo System Operating InstructionsPanasonic
Panasonic

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche