Datenblatt-pdf.com


TQ2SA-24V Schematic ( PDF Datasheet ) - Panasonic

Teilenummer TQ2SA-24V
Beschreibung SMD RELAYS
Hersteller Panasonic
Logo Panasonic Logo 




Gesamt 5 Seiten
TQ2SA-24V Datasheet, Funktion
TQ SMD
TESTING
LOW-PROFILE
TQ SMD RELAYSSURFACE-MOUNT RELAY
14
.551
9
.354
5.6
.220
mm inch
RoHS Directive compatibility information
http://www.nais-e.com/
FEATURES
• Low-profile: 6 mm .236 inch
(Tape height: max. 6.5 mm .256 inch)
• Tape and reel package is available as standard packing style
• Surge withstand between contacts and coil: 2,500 V
• Breakdown voltage between contacts and coil: 1,500 V
• Capacity: 2 A
• High sensitivity:
2 Form C; 140 mW power consumption (Single side stable type)
SPECIFICATIONS
Contact
Arrangement
2 Form C
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
75 m
Contact material
Au-clad AgNi type
Nominal switching capacity
(resistive load)
2 A 30 V DC,
0.5 A 125 V AC
Rating
Max. switching power
(resistive load)
Max. switching voltage
60 W, 62.5 VA
220 V DC, 125 V AC
Max. switching current
2A
Min. switching capacity
(Reference value)#1
10 µA 10 mV DC
Nominal
operating
power
Single side stable
1 coil latching
140 mW (1.5 to 12 V DC)
200 mW (24 V DC)
300 mW (48 V DC)
70 mW (1.5 to 12 V DC)
100 mW (24 V DC)
2 coil latching
140 mW (1.5 to 12 V DC)
200 mW (24 V DC)
Mechanical (at 180 cpm)
108
Expected
life (min.
operations)
Electrical
(at 20 cpm)
2 A 30 V DC
resistive
1 A 30 V DC
resistive
105
2×105
0.5 A 125 V AC
resistive
105
Note:
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load. (SX relays are available for low level load switching [10V DC, 10mA
max. level])
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as “Initial breakdown voltage” section.
*2 By resistive method, nominal voltage applied to the coil; contact carrying current:
2 A.
*3 Nominal voltage applied to the coil, excluding contact bounce time.
*4 Nominal voltage applied to the coil, excluding contact bounce time without diode.
*5 Half-wave pulse of sine wave: 6 ms; detection time: 10 µs
*6 Half-wave pulse of sine wave: 6 ms
*7 Detection time: 10 µs
*8 Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT .
Characteristics
Initial insulation resistance*1
Initial
breakdown
voltage
Between open
contacts
Between contact sets
Between contact and
coil
Initial surge
voltage
Between open
contacts
(10×160 µs)
Between contacts and
coil (2×10 µs)
Temperature rise*2 (at 20°C)
Operate time [Set time]*3 (at 20°C)
Release time [Reset time]*4
(at 20°C)
Shock resistance
Functional*5
Destructive*6
Functional*7
Vibration resistance
Destructive
Conditions for
operation, transport
and storage*8
(Not freezing and
condensing at low
temperature)
Unit weight
Ambient
temperature
Humidity
Min. 1,000 M(at 500 V DC)
1,000 Vrms for 1 min.
(Detection current: 10 mA)
1,500 Vrms for 1 min.
(Detection current: 10 mA)
1,500 Vrms for 1 min.
(Detection current: 10 mA)
1,500 V (FCC Part 68)
2,500 V (Telcordia)
Max. 50°C
Max. 4 ms [Max. 4 ms]
Max. 4 ms [Max. 4 ms]
Min. 750 m/s2 {75 G}
Min. 1,000 m/s2 {100 G}
200 m/s2 {20G}, 10 to 55 Hz
at double amplitude of 3.3 mm
294 m/s2 {30G}, 10 to 55 Hz
at double amplitude of 5 mm
–40°C to +85°C*3
–40°F to +185°F
5 to 85% R.H.
Approx. 2 g .071 oz
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.





SeitenGesamt 5 Seiten
PDF Download[ TQ2SA-24V Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
TQ2SA-24VSMD RELAYSPanasonic
Panasonic

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche