Datenblatt-pdf.com


2MBI100HB-120-50 Schematic ( PDF Datasheet ) - Fuji Electric

Teilenummer 2MBI100HB-120-50
Beschreibung High Speed IGBT Module
Hersteller Fuji Electric
Logo Fuji Electric Logo 




Gesamt 6 Seiten
2MBI100HB-120-50 Datasheet, Funktion
http://www.fujielectric.com/products/semiconductor/
2MBI100HB-120-50
IGBT Modules
HIGH SPEED IGBT MODULE
1200V / 100A / 2 in one package
Features
High speed switching
Voltage drive
Low Inductance module structure
Applications
Soft-switching Application
Industrial machines, such as Welding machines
Maximum Ratings and Characteristics
Absolute Maximum Ratings (at Tc=25°C unless otherwise specified)
Items
Collector-Emitter voltage
Symbols
VCES
Conditions
Gate-Emitter voltage
VGES
Ic Continuous
Collector current
Ic pulse
1ms
-Ic
-Ic pulse
Collector Power Dissipation
Pc
Junction temperature
Tj
Storage temperature
Tstg
Isolation voltage Between terminal and copper base (*1) Viso
Screw torque
Mounting (*2)
Terminals (*3)
-
1ms
1 device
AC : 1min.
Note *1: All terminals should be connected together when isolation test will be done.
Note *2: Recommendable Value : Mounting 2.5 to 3.5 Nm (M5)
Note *3: Recommendable Value : Terminals 2.5 to 3.5 Nm (M5)
Electrical characteristics (at Tj= 25°C unless otherwise specified)
Tc=25°C
Tc=80°C
Tc=25°C
Tc=80°C
Items
Zero gate voltage collector current
Gate-Emitter leakage current
Gate-Emitter threshold voltage
Collector-Emitter saturation voltage
Input capacitance
Turn-off time
Forward on voltage
Lead resistance, terminal-chip (*4)
Note *4: Biggest internal terminal resistance among arm.
Symbols
ICES
IGES
VGE (th)
VCE (sat)
(terminal)
VCE (sat)
(chip)
Cies
toff
tf
VF
(terminal)
VF
(chip)
R lead
Conditions
VGE = 0V, VCE = 1200V
VCE = 0V, VGE = ±20V
VCE = 20V, IC = 100mA
Tj=25°C
VGE = 15V
Tj=125°C
IC = 100A
Tj=25°C
Tj=125°C
VCE = 10V, VGE = 0V, f = 1MHz
VCC = 600V, IC = 100A
VGE = ±15V, RG = 3.1Ω
Ls = 20nH
Tj=25°C
VGE = 0V
Tj=125°C
IF = 50A
Tj=25°C
Tj=125°C
Thermal resistance characteristics
Items
Symbols Conditions
Thermal resistance (1device)
Contact Thermal resistance (1 device) (*5)
Rth(j-c)
Rth(c-f)
IGBT
FWD
with Thermal Compound
Note *5: This is the value which is defined mounting on the additional cooling fin with thermal compound.
Maximum ratings
1200
±20
150
100
300
200
50
100
1040
+150
-40 ~ +125
2500
3.5
3.5
Units
V
V
A
W
°C
VAC
Nm
Characteristics
min. typ. max.
- - 1.0
- - 200
5.7 6.2 6.7
- 3.30 3.60
- 4.20 -
- 3.10 3.40
- 4.00 -
-9-
- 0.30 0.60
0.05 0.20
- 1.85 2.30
- 2.00 -
- 1.70 2.15
- 1.85 -
- 1.55 -
Units
mA
nA
V
V
nF
µs
V
Characteristics
min. typ. max.
- - 0.12
- - 0.65
- 0.05 -
Units
°C/W
1






2MBI100HB-120-50 Datasheet, Funktion
2MBI100HB-120-50
IGBT Modules
http://www.fujielectric.com/products/semiconductor/
WARNING
1.This Catalog contains the product specifications, characteristics, data, materials, and structures as of May 2011.
The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be
sur to obtain the latest specifications.
2.All applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or
implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Co., Ltd. is (or shall be deemed)
granted. Fuji Electric Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged
infringement of other's intellectual property rights which may arise from the use of the applications described herein.
3.Although Fuji Electric Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become
faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent
the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your
design failsafe, flame retardant, and free of malfunction.
4.The products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability
requirements.
• Computers
• OA equipment
• Communications equipment (terminal devices)
• Measurement equipment
• Machine tools
• Audiovisual equipment • Electrical home appliances • Personal equipment • Industrial robots etc.
5.If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below,
it is imperative to contact Fuji Electric Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate
measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment
becomes faulty.
• Transportation equipment (mounted on cars and ships)
• Trunk communications equipment
• Traffic-signal control equipment
• Gas leakage detectors with an auto-shut-off feature
• Emergency equipment for responding to disasters and anti-burglary devices • Safety devices
• Medical equipment
6.Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment
(without limitation).
• Space equipment
• Aeronautic equipment
• Nuclear control equipment
• Submarine repeater equipment
7.Copyright ©1996-2011 by Fuji Electric Co., Ltd. All rights reserved.
No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Co., Ltd.
8.If you have any question about any portion in this Catalog, ask Fuji Electric Co., Ltd. or its sales agents before using the product.
Neither Fuji Electric Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions
set forth herein.
6

6 Page







SeitenGesamt 6 Seiten
PDF Download[ 2MBI100HB-120-50 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
2MBI100HB-120-50Power Devices (IGBT)ETC
ETC
2MBI100HB-120-50High Speed IGBT ModuleFuji Electric
Fuji Electric

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche