|
|
Número de pieza | 95F118BW | |
Descripción | MB95F118BW | |
Fabricantes | Fujitsu Media Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 95F118BW (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-12615-1E
8-bit Proprietary Microcontrollers
CMOS
F2MC-8FX MB95110B Series
www.DataSheetM4U.coBm 95116B/F118BS/F118BW/FV100D-101
■ DESCRIPTION
The MB95110B series is general-purpose, single-chip microcontrollers. In addition to a compact instruction set,
the microcontrollers contain a variety of peripheral functions.
Note : F2MC is the abbreviation of FUJITSU Flexible Microcontroller.
■ FEATURES
• F2MC-8FX CPU core
Instruction set that is optimum to the controllers
• Multiplication and division instructions
• 16-bit arithmetic operation
• Bit test branch instruction
• Bit manipulation instructions etc.
• Clock
• Main clock
• Main PLL clock
• Sub clock (for dual clock product)
• Sub PLL clock (for dual clock product)
(Continued)
Be sure to refer to the “Check Sheet” for the latest cautions on development.
“Check Sheet” is seen at the following support page
URL : http://www.fujitsu.com/global/services/microelectronics/product/micom/support/index.html
“Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system
development.
Copyright©2006 FUJITSU LIMITED All rights reserved
1 page MB95110B Series
■ SELECT OF OSCILLATION STABILIZATION WAIT TIME (MASK ROM PRODUCT ONLY)
For the MASK ROM product, you can set the mask option when ordering MASK ROM to select the initial value
of main clock oscillation stabilization wait time from among the following four values.
Note that the evaluation and Flash memory products are fixed their initial value of main clock oscillation
stabilization wait time at the maximum value.
Selection of oscillation stabilization wait time
(22 − 2) /FCH
www.DataSheet4U.com
(212 − 2) /FCH
(213 − 2) /FCH
(214 − 2) /FCH
Remarks
0.5 µs (at main oscillation clock 4 MHz)
Approx. 1.02 ms (at main oscillation clock 4 MHz)
Approx. 2.05 ms (at main oscillation clock 4 MHz)
Approx. 4.10 ms (at main oscillation clock 4 MHz)
■ PACKAGES AND CORRESPONDING PRODUCTS
Part number
Package
LCC-48P-M09
FPT-48P-M26
FPT-52P-M01
BGA-224P-M08
: Available
: Unavailable
* : Under development
MB95116B
*
MB95F118BS/F118BW
MB95FV100D-101
5
5 Page MB95110B Series
(Continued)
Pin no.
LQFP*1 LQFP*2
Pin name
I/O
Circuit
type*3
Function
27 29 PG2/X1A
This pin is general-purpose port in single clock product (PG2) .
This pin is sub clock oscillation pin in dual clock product (32 kHz) .
H/A
28 30 PG1/X0A
This pin is general-purpose port in single clock product (PG1) .
This pin is sub clock oscillation pin in dual clock product (32 kHz) .
29 31
RST
B’ Reset pin
www.DataSheet4U.c3o0m
31
32 P00/INT00
34 P01/INT01
32 35 P02/INT02
33
34
36 P03/INT03
37 P04/INT04
C
General-purpose I/O port.
The pins are shared with external interrupt input. Large current port.
35 38 P05/INT05
36 39 P06/INT06
37 40 P07/INT07
38 41 P10/UI0
G
General-purpose I/O port.
The pin is shared with UART/SIO ch.0 data input.
39 42 P11/UO0
General-purpose I/O port.
The pin is shared with UART/SIO ch.0 data output.
40 43 P12/UCK0
General-purpose I/O port.
The pin is shared with UART/SIO ch.0 clock I/O.
41
44
P13/TRG0/
ADTG
H
General-purpose I/O port.
The pin is shared with 16-bit PPG ch.0 trigger input (TRG0) and
A/D converter trigger input (ADTG).
42 45 P14/PPG0
General-purpose I/O port.
The pin is shared with 16-bit PPG ch.0 output.
43 47
P15
General-purpose I/O port.
44 48 P60/PPG10
45 49 P61/PPG11
General-purpose I/O port.
The pins are shared with 8/16-bit PPG ch.1 output.
46 50 P62/TO10 K General-purpose I/O port.
47 51 P63/TO11
The pins are shared with 8/16-bit compound timer ch.1 output.
48 52 P64/EC1
General-purpose I/O port.
The pin is shared with 8/16-bit compound timer ch.1 clock input.
⎯
7, 20,
33, 46
NC
⎯
Internal connect pin.
Be sure this pin is left open.
*1 : FPT-48P-M26
*2 : FPT-52P-M01
*3 : For the I/O circuit type, refer to “■ I/O CIRCUIT TYPE”
11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet 95F118BW.PDF ] |
Número de pieza | Descripción | Fabricantes |
95F118BW | MB95F118BW | Fujitsu Media Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |