|
|
PDF FP-M Data sheet ( Hoja de datos )
| Número de pieza | FP-M | |
| Descripción | compact board type PLC which can control temperature | |
| Fabricantes | Panasonic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de FP-M (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
FP-M (C16T)
The FP-M (C16T) is a compact board type PLC which can control temperature.
I Features
1. The board size (W140 ҂ H75 mm
W5.512 ҂ H2.953 inch) offers
space-savings.
You can save more space by using this
model than with the built-in type of the
FP-M series.
2. A volume input (manual dial-set
register) enables the connection
to a thermistor.
The FP-M has three the volume input
(manual dial-set register) for external
outputs. One of them can be connected
to a thermistor and used for simple
temperature control. The volume input
(manual dial-set register) can also be
connected to external manual dial-set
register to set the timer and so on.
3. The terminal arrangement makes
wiring easy.
The output circuit uses an independent
common circuit which enables
connection to loads having different
voltage. The sensor power supply can
also be used on the input side.
I Power Supply and I/O Specifications
Item Description
Power supply 24 V DC note)
Input
24 V DC ±common
Output
Transistor 0.5 A
Note) 12 V DC models are also available.
I Performance Specifications
Item Description
Number of I/O points
16 points
Expansion
—
Operation speed
1.6 µs/step
Internal memory
EEP-ROM
Memory capacity
900 steps
Operation
memory
Internal relay
Timer/Counter
Data register
256 points
128 points in total
256 words
I Applicable Functions
Item Description
Pulse catch input 4 points
Interrupt input
2 points
Analog I/O
—
Volume input
(Manual dial-set
register)
3 points. One of them can be used for ther-
mistor input.
They can be used as external inputs by using
a connecto. r
High speed counter 1 point (1 phase: 10 kHz/ 2 phases: 10 kHz)
Pulse output
1 point (max. 4.9 kHz)
RS232C port
—
I Applicable Network Functions
Item Description
Remote I/O
—
Inter-PLC link
—
Computer link
Available by adding a tool port and C-NET adapter
Modem connection —
I Other Built-in Functions
Item Description
Program block-edit during RUN —
Constant scan
Available
Adjustable input time filtering Available, from 1 to 128 ms (X0 to X3)
Clock/Calendar function
—
04/2005
1 page  
FP-M (C20R/C20T/C32T) Table of Boards
Control Boards
Control boards are available in three types - C20R, C20T and C32T - according to the
number of I/O points and type of output. C type which is equipped with a
clock/calendar function and RS232C port is available for each of the three types.
C20R(AFC12212-F)/C20RC(AFC22212C-F)
DC input 12 points/Relay output 8 points
Note The type with 12 V power supply voltage is also available.
Equipped with PA relay
Expansion Boards
Expansion is possible up to maximum 4 boards or maximum 192 points in terms of I/O
points. The expansion board can be selected among the types as shown at right,
depending on the I/O balance and type of output.
FP-M-E20R expansion I/O board (AFC13012-F)
DC input 12 points/Relay output 8 points
Note The type with 12 V power supply voltage is also available.
Equipped with PA relay
Intelligent Boards
The board for input/output of analog data are available. They can be used for capture
of the data of displacement sensor and inverter control.
Analog I/O board (AFB6480)
Analog input: 4 channels, analog output: 1 channel
Boards and Adapters for Network
Special boards and adapter are available each for remote I/O, I/O linking with host
PLCs and small-scale computer network C-NET.
Range
Voltage: 0 to 5 V, 0 to 10 V
Current: 0 to 20 mA
Resolution 8 bits (K0 to K255)
FP-M transmitter master board (AFC1752)
For remote I/O and I/O link (compatible with MEWNET-TR)
04/2005
5 Page 
FP-M Options
I Optional Memories
Memory (EPROM)
For program saving and ROM operation
Two EPROMs (equivalent to 27C256A) per set
Write is performed by commercially available ROM writer.
Part number: AFP5202 (Two in set)
Master memory (EEPROM)
For program copy and transmission
One EEPROM (equivalent to X28C256PI-20)
Write is performed by setting the master memory into FP-M.
Part number: AFP5207 (One in set)
I Mounting Parts (Kit with case type includes these parts.)
Control board case
To be set to the top of a kit with case
4 spacers (AFB88032) for case setting are attached.
For C20R Part number : AFC18011
For C20T Part number : AFC18012
For C32T Part number : AFC18013
Expansion I/O board case
To be set to the middle of a kit with case.
4 spacers (AFB8803) for case setting are attached.
Part number: AFC1802
Skirt case
To be set to the bottom of a kit with case.
4 spacers (AFB8803) for case setting are attached.
Part number: AFC1803
Mounting plate
Metal plate on which FP-M is fixed
4 board mounting M3 screws are attached.
DIN rail is mountable.
Part number: AFB6804
Nameplate for expansion I/O board case
Nameplate indicating I/O number of the I/O LED. It should
be installed at the side of the expansion I/O board when a
kit is assembled.
For E20R Part number: AFC18062
For M1T-E Part number: AFC18061
For M1T-EI Part number: AFC18063
For M1T-EO Part number: AFC18064
04/2005
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet FP-M.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| FP-010RE101M-0L | Functional Polymer Capacitors |  FUJITSU |
| FP-010RE221M-0L | Functional Polymer Capacitors | FUJITSU |
| FP-010RE330M-0L | Functional Polymer Capacitors | FUJITSU |
| FP-010RE471M-SL | Functional Polymer Capacitors | FUJITSU |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |