Datenblatt-pdf.com

NFSB036BT Schematic ( Datenblatt PDF ) - NICHIA CORPORATION

Teilenummer NFSB036BT
Beschreibung BLUE LED
Hersteller NICHIA CORPORATION
Logo NICHIA CORPORATION Logo 

Gesamt 17 Seiten
		
NFSB036BT Datasheet, Funktion
NICHIA STS-DA1-2252 <Cat.No.120229>
NICHIA CORPORATION SPECIFICATIONS FOR BLUE LED
NFSB036BT
Pb-free Reflow Soldering Application
Built-in ESD Protection Device
RoHS Compliant






NFSB036BT Datasheet, Funktion
SOLDERING
NICHIA STS-DA1-2252 <Cat.No.120229>
• Recommended Reflow Soldering Condition(Lead-free Solder)
1 to 5°C per sec
Pre-heat
180 to 200°C
60sec Max
Above 220°C
260°C Max
10sec Max
• Recommended Hand Soldering Condition
Temperature
350°C Max
Soldering Time
3sec Max
120sec Max
Recommended Soldering Pad Pattern
4.5
1.4
(単位 Unit: mm)
* This LED is designed to be reflow soldered on to a PCB. If dip soldered, Nichia cannot guarantee its reliability.
* Reflow soldering must not be performed more than twice. Hand soldering must not be performed more than once.
* Avoid rapid cooling. Ramp down the temperature gradually from the peak temperature.
* Nitrogen reflow soldering is recommended. Air flow soldering conditions can cause optical degradation,
caused by heat and/or atmosphere.
* Since the silicone used in the encapsulating resin is soft, do not press on the encapsulant resin.
Pressure can cause nicks, chip-outs, encapsulant delamination and deformation, and wire breaks, decreasing reliability.
* Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable,
a double-head soldering iron should be used.
It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
* When soldering, do not apply stress to the LED while the LED is hot.
5

6 Page







NFSB036BT pdf, datenblatt
NICHIA STS-DA1-2252 <Cat.No.120229>
FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS
* 本特性は参考です。
All characteristics shown are for reference only and are not guaranteed.
NFSB036B
管理番号 No. STS-DA7-2290
順電 圧-順電流 特性
Forward Voltage vs
Forward Current
1000
VfIf
T A=25 °C
周囲温 度-順電 圧特性
Ambient Temperature vs
Forward Voltage
4.5
TaVf
IFP= 150mA
350
150
100
4.0
3.5
3.0
10
2.5
3.0 3.5 4.0
順電圧
Forward Voltage(V)
4.5
2.5
-60 -40 -20 0 20 40 60 80 100 120
周囲温度
Ambient Temperature(°C)
順電 流-相対光 束特 性
Forward Current vs
Relative Luminous Flux
2.5
IfIv
T A=25 °C
周囲温 度-相対 光束特 性
Ambient Temperature vs
Relative Luminous Flux
1.4
TaIv
IFP= 150mA
2.0
1.5
1.0
0.5
0.0
0
100 200 300 400
順電流
Forward Current(mA)
500
1.2
1.0
0.8
0.6
-60 -40 -20 0 20 40 60 80 100 120
周囲温度
Ambient Temperature(°C)
11

12 Page


SeitenGesamt 17 Seiten
PDF Download[ NFSB036BT.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
NFSB036BTBLUE LEDNICHIA CORPORATION
NICHIA CORPORATION

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com    |   2018   |  Kontakt  |   Suche