|
|
Número de pieza | U2000 | |
Descripción | USB Power Sensors | |
Fabricantes | Agilent | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de U2000 (archivo pdf) en la parte inferior de esta página. Total 24 Páginas | ||
No Preview Available ! Agilent U2000 Series USB
Power Sensors
Data Sheet
The compact, low-cost
alternative to conventional
power measurement solutions
1 page Introducing the U2000 Series USB Power Sensors (continued)
Faster production testing of
multiple channels
The U2000 Series’ fast measurement
speed helps reduce test time. This,
coupled with the capability to enable
monitoring of more than 20 channels
simultaneously, is an advantage in
the production line where efficiency
is of utmost priority.
The U2000 Series has both internal
and external zeroing capabilities.
With internal zeroing, high isolation
switches in the sensor are opened to
isolate the sensor from the device-
under-test (DUT) it is connected to.
As such, you don’t need to power-off
the DUT or disconnect the sensors.
This speeds up testing and reduces
sensor wear-and-tear.
No manual input of calibration data
is required. All calibration factors,
as well as temperature and linearity
corrections, are stored in the sensors’
EEPROM, auto-downloaded at
calibration.
Often times, you’d need to automate
your tests. The U2000 Series sensors
are well-equipped for seamless inte-
gration to your system with industry-
standard SCPI compatibility. They
also come with built-in triggering
capability to allow receipt of external
triggers from other instruments.
Transform your signal generators and spectrum analyzers into
accurate power meters
You could literally have a power meter next to you—or instead, turn your Agilent
MXG signal generator or N9340A/B handheld spectrum analyzer into a power
meter for accurate power measurements. Even with the U2000 connected, you
can switch between power measurements and the device’s original function at
any time. You can also use the U2000 with your Agilent PNA network analyzer
for source power calibration.
Intuitive power analysis software
The N1918A Power Analysis Manager software not only displays measurements
with the U2000 Series, it also provides various features and functions to help
you monitor and troubleshoot signals efficiently and effectively.
Multiple display types1
Multiple channel list and measurement math
1. Software capability differs between the two
versions of the software: Power Panel and
Power Analyzer. Please refer to page 18 for
detailed comparison.
Data recording with limit and alert settings1
Min/Max readings
5
5 Page Specifications (continued)
Typical power accuracy at 25 °C for
U2000/1/2/4A sensors1, 2
Typical power accuracy at 25 °C for
U2000/1B sensors1, 2
Typical power accuracy at 25 °C for
U2000/1/2H sensors1, 2
1. Measurement uncertainty ≤ 1.9%. At room temperature and excluding power level dependent terms (zero set, drift, and noise).
Refer to Agilent Fundamentals of RF and Microwave Power Measurements (Part 3) Power Measurement Uncertainty per International Guide
(Application Note 1449-3), 5988-9215EN for more information on measurement uncertainty.
2. After zeroing, 30 minutes of power-on warm-up, and 1024 averages.
11
11 Page |
Páginas | Total 24 Páginas | |
PDF Descargar | [ Datasheet U2000.PDF ] |
Número de pieza | Descripción | Fabricantes |
U2000 | USB Power Sensors | Agilent |
U2008B | Low Cost Current Feedback Phase Control Circuit | TEMIC Semiconductors |
U2008B | Low-Cost Phase-Control IC with Soft Start | ATMEL Corporation |
U2008B-M | Low-Cost Phase-Control IC with Soft Start | ATMEL Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |