|
|
|
BUK7E2R7-30B Schematic ( PDF Datasheet ) - NXP Semiconductors
| Teilenummer | BUK7E2R7-30B |
|
| Beschreibung | N-channel TrenchMOS standard level FET | |
| Hersteller | NXP Semiconductors | |
| Logo |  |
|
Gesamt 14 Seiten 
BUK7E2R7-30B
N-channel TrenchMOS standard level FET
Rev. 04 — 7 June 2010
Product data sheet
1. Product profile
1.1 General description
Standard level N-channel enhancement mode Field-Effect Transistor (FET) in a plastic
package using TrenchMOS technology. This product has been designed and qualified to
the appropriate AEC standard for use in automotive critical applications.
1.2 Features and benefits
Low conduction losses due to low
on-state resistance
Q101 compliant
Suitable for standard level gate drive
sources
Suitable for thermally demanding
environments due to 175 °C rating
1.3 Applications
12 V loads
Automotive systems
General purpose power switching
Motors, lamps and solenoids
1.4 Quick reference data
Table 1. Quick reference data
Symbol Parameter
Conditions
Min Typ Max Unit
VDS
drain-source
Tj ≥ 25 °C; Tj ≤ 175 °C
voltage
- - 30 V
ID
drain current
VGS = 10 V; Tmb = 25 °C;
[1] - - 75 A
see Figure 1; see Figure 3
Ptot
total power
Tmb = 25 °C; see Figure 2
dissipation
- - 300 W
Static characteristics
RDSon
drain-source
on-state
resistance
VGS = 10 V; ID = 25 A; Tj = 25 °C; - 2.3 2.7 mΩ
see Figure 11; see Figure 12
Avalanche ruggedness
EDS(AL)S
non-repetitive
drain-source
avalanche energy
Dynamic characteristics
ID = 75 A; Vsup ≤ 30 V;
RGS = 50 Ω; VGS = 10 V;
Tj(init) = 25 °C; unclamped
- - 2.3 J
QGD
gate-drain charge VGS = 10 V; ID = 25 A; VDS = 24 V; - 29 - nC
Tj = 25 °C; see Figure 13
[1] Continuous current is limited by package.
 
NXP Semiconductors
BUK7E2R7-30B
N-channel TrenchMOS standard level FET
6. Characteristics
Table 6. Characteristics
Symbol
Parameter
Static characteristics
V(BR)DSS
drain-source
breakdown voltage
VGS(th)
gate-source threshold
voltage
IDSS
IGSS
RDSon
drain leakage current
gate leakage current
drain-source on-state
resistance
Dynamic characteristics
QG(tot)
QGS
QGD
Ciss
Coss
Crss
total gate charge
gate-source charge
gate-drain charge
input capacitance
output capacitance
reverse transfer
capacitance
td(on)
tr
td(off)
tf
LD
turn-on delay time
rise time
turn-off delay time
fall time
internal drain
inductance
LS internal source
inductance
Source-drain diode
VSD source-drain voltage
trr reverse recovery time
Qr recovered charge
Conditions
ID = 0.25 mA; VGS = 0 V; Tj = 25 °C
ID = 0.25 mA; VGS = 0 V; Tj = -55 °C
ID = 1 mA; VDS = VGS; Tj = 25 °C;
see Figure 10
ID = 1 mA; VDS = VGS; Tj = 175 °C;
see Figure 10
ID = 1 mA; VDS = VGS; Tj = -55 °C;
see Figure 10
VDS = 30 V; VGS = 0 V; Tj = 175 °C
VDS = 30 V; VGS = 0 V; Tj = 25 °C
VDS = 0 V; VGS = 20 V; Tj = 25 °C
VDS = 0 V; VGS = -20 V; Tj = 25 °C
VGS = 10 V; ID = 25 A; Tj = 175 °C;
see Figure 11; see Figure 12
VGS = 10 V; ID = 25 A; Tj = 25 °C;
see Figure 11; see Figure 12
ID = 25 A; VDS = 24 V; VGS = 10 V;
Tj = 25 °C; see Figure 13
VGS = 0 V; VDS = 25 V; f = 1 MHz;
Tj = 25 °C; see Figure 14
VDS = 30 V; RL = 1.2 Ω; VGS = 10 V;
RG(ext) = 10 Ω; Tj = 25 °C
from drain lead 6 mm from package to
center of die ; Tj = 25 °C
from upper edge of drain mounting base
to centre of die ; Tj = 25 °C
from source lead to source bond pad ;
Tj = 25 °C
IS = 40 A; VGS = 0 V; Tj = 25 °C;
see Figure 15
IS = 20 A; dIS/dt = -100 A/µs;
VGS = -10 V; VDS = 20 V; Tj = 25 °C
Min Typ Max Unit
30 - - V
27 - - V
234V
1- - V
- - 4.4 V
- - 500 µA
-
0.02 1
µA
- 2 100 nA
- 2 100 nA
- - 5.1 mΩ
- 2.3 2.7 mΩ
- 91 - nC
- 19 - nC
- 29 - nC
- 4659 6212 pF
- 1691 2029 pF
- 622 852 pF
- 31 - ns
- 107 - ns
- 113 - ns
- 118 - ns
- 4.5 - nH
- 2.5 - nH
- 7.5 - nH
- 0.85 1.2 V
- 88 - ns
- 132 - nC
BUK7E2R7-30B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 04 — 7 June 2010
© NXP B.V. 2010. All rights reserved.
6 of 14
6 Page 
NXP Semiconductors
BUK7E2R7-30B
N-channel TrenchMOS standard level FET
9. Legal information
9.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet Development
Preliminary [short] data sheet Qualification
Product [short] data sheet
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product
status information is available on the Internet at URL http://www.nxp.com.
9.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
9.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use in automotive applications — This NXP
Semiconductors product has been qualified for use in automotive
applications. The product is not designed, authorized or warranted to be
suitable for use in medical, military, aircraft, space or life support equipment,
nor in applications where failure or malfunction of an NXP Semiconductors
product can reasonably be expected to result in personal injury, death or
severe property or environmental damage. NXP Semiconductors accepts no
liability for inclusion and/or use of NXP Semiconductors products in such
equipment or applications and therefore such inclusion and/or use is at the
customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on a weakness or default in the
customer application/use or the application/use of customer’s third party
customer(s) (hereinafter both referred to as “Application”). It is customer’s
sole responsibility to check whether the NXP Semiconductors product is
suitable and fit for the Application planned. Customer has to do all necessary
testing for the Application in order to avoid a default of the Application and the
product. NXP Semiconductors does not accept any liability in this respect.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Limiting values — Stress above one or more limiting values (as defined in the
Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
BUK7E2R7-30B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 04 — 7 June 2010
© NXP B.V. 2010. All rights reserved.
12 of 14
12 Page | ||
| Seiten | Gesamt 14 Seiten | |
| PDF Download | [ BUK7E2R7-30B Schematic.PDF ] | |
Link teilen
Besondere Datenblatt
| Teilenummer | Beschreibung | Hersteller |
| BUK7E2R7-30B | N-channel TrenchMOS standard level FET | NXP Semiconductors |
| Teilenummer | Beschreibung | Hersteller |
| CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
 Fairchild Semiconductor |
| KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
 KEC |
| www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |