Datenblatt-pdf.com


AR-M207 Schematic ( PDF Datasheet ) - Sharp

Teilenummer AR-M207
Beschreibung DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUAL
Hersteller Sharp
Logo Sharp Logo 




Gesamt 30 Seiten
AR-M207 Datasheet, Funktion
MODEL
AR-M161
AR-M162
AR-M165
AR-M206
AR-M207
AR-M161/AR-M162/AR-M165
AR-M206/AR-M207
With the RSPF installed
DIGITAL MULTIFUNCTIONAL
SYSTEM
OPERATION MANUAL
(for general information and copier)
Page
PART 1: GENERAL INFORMATION
BEFORE USING THE PRODUCT 12
TROUBLESHOOTING
AND MAINTENANCE
24
PERIPHERAL DEVICES
AND SUPPLIES
40
PART 2: COPIER OPERATION
COPY FUNCTIONS
45
CONVENIENT COPY
FUNCTIONS
64
APPENDIX
73
KEY OPERATOR'S GUIDE 75
Be sure to become thoroughly familiar with this manual to
gain the maximum benefit from the product.
Before installing this product, be sure to read the
cautions and installation requirements sections.
Be sure to keep all operation manuals handy for reference
including this manual, the "Operation manual (for general
information and copier)" and operation manuals for any
optional equipment which has been installed.






AR-M207 Datasheet, Funktion
CONTENTS
Part 1: General Information
PRODUCT CONFIGURATIONS ................................................................................................................ 3
CAUTIONS................................................................................................................................................. 6
q CAUTIONS ON USING..................................................................................................................................... 6
q LASER INFORMATION .................................................................................................................................... 7
INSTALLATION REQUIREMENTS ........................................................................................................... 8
q ENVIRONMENTAL INFORMATION................................................................................................................. 8
MANUALS PROVIDED WITH THE PRODUCT......................................................................................... 9
MAIN FEATURES .................................................................................................................................... 10
1 BEFORE USING THE PRODUCT
PART NAMES AND FUNCTIONS ................... 12
q OPERATION PANEL ......................................14
q OPERATION IN COPY, PRINT, SCAN, AND
FAX MODES...................................................16
TURNING THE POWER ON AND OFF ........... 17
q POWER ON ....................................................17
q POWER OFF ..................................................17
LOADING PAPER............................................ 18
q PAPER............................................................18
q LOADING PAPER...........................................19
q CHANGING THE PAPER SIZE SETTING OF A
TRAY ..............................................................21
q DISABLING (ENABLING) AUTO TRAY
SWITCHING ...................................................22
AUDITING MODE ............................................ 23
q NUMBER OF ACCOUNTS IN AUDITING
MODE .............................................................23
q USING AUDITING MODE...............................23
2 TROUBLESHOOTING AND MAINTENANCE
TROUBLESHOOTING..................................... 25
q MACHINE/COPYING PROBLEMS ................ 25
INDICATORS AND DISPLAY MESSAGES .... 28
REMOVING MISFEEDS .................................. 29
q ORIGINAL MISFEED IN THE SPF ................ 29
q MISFEED IN THE BYPASS TRAY ................ 30
q MISFEED IN THE MACHINE......................... 31
q MISFEED IN TRAY 1 ..................................... 33
q MISFEED IN TRAY 2 ..................................... 34
REPLACING THE TONER CARTRIDGE ........ 35
CHECKING THE TOTAL OUTPUT COUNT ... 36
CLEANING THE MACHINE............................. 37
q CLEANING THE DOCUMENT GLASS AND
SPF/DOCUMENT COVER............................. 37
q CLEANING THE BYPASS TRAY PAPER FEED
ROLLER......................................................... 37
q CLEANING THE TRANSFER CHARGER ..... 38
ADJUSTING THE DISPLAY CONTRAST....... 39
3 PERIPHERAL DEVICES AND SUPPLIES
OPTIONAL EQUIPMENT ................................ 40
q REVERSING SINGLE PASS FEEDER /
SINGLE PASS FEEDER................................ 41
q 250-SHEET PAPER FEED UNIT / 2 X
250-SHEET PAPER FEED UNIT................... 41
q DUAL FUNCTION BOARD ............................ 42
STORAGE OF SUPPLIES............................... 42
q PROPER STORAGE ..................................... 42
4

6 Page









AR-M207 pdf, datenblatt
MAIN FEATURES
High-speed laser copying
First-copy time*1 at 300 dpi*2 is only 7.2 seconds.
Copying speed is 20 (AR-M206/AR-M207) or 16 (AR-M161/AR-M162/AR-M165) copies per minute. This provides
a big boost to workplace productivity.
*1 Measured after the machine has warmed up following power-on, copying using the document glass (A4 (8-1/2" x 11") paper
fed from machine tray 1). The first-copy time may vary depending on machine operating conditions and ambient conditions
such as temperature and power voltage.
*2 "dpi" ("dots per inch") is a unit that is used to measure resolution. Resolution indicates how much detail can be reproduced in
a printed or scanned image.
High-quality digital image
High-quality copying at 600 dpi is performed.
In addition to automatic exposure adjustment, two exposure modes can be selected: "TEXT" for text-only originals,
and "PHOTO" for photographs. The exposure can be adjusted to five levels in each mode.
Photo mode allows clear copying of originals with delicate halftones such as monochrome photos and colour photos.
Enhanced copying features
The zoom function can be used to reduce or enlarge copies from 25% to 400% in increments of 1%. (When the
SPF is used, the zoom copy ratio range is 50% to 200%.)
Up to 999 copies can be made of an original scanned just once. (This can be changed to a maximum of 99 copies
in the key operator programs.)
The key operator programs allow functions to be selected and managed to meet your specific needs. For example,
access to the machine can be controlled by enabling audit mode.
The optional dual function board can be installed to enable use of rotation copy and other convenient functions.
AA
Erase copy*
AA
Margin shift*
2 in 1 copy* 4 in 1 copy*
CARD
Front
CARD
CARD
Rotation copy*
XY zoom copying
* When the dual function board is installed.
Dual page copy
Back
Card shot*
Sort function (when the dual function board is installed)
Copies of multiple original pages can sorted into sets.
3
2
1
Laser printer function / colour scanner function
The machine is equipped standard with a USB port and a parallel port. A computer can be connected to these
ports to use the machine as a printer or a scanner.
To use the machine as a printer or scanner, the printer driver or scanner driver must first be installed as explained
in the "Software setup guide".
The scanning feature is only available when the computer is connected to the USB port and is running Windows
98/Me/2000/XP. If the computer is running Windows 95/NT 4.0 or is connected to the parallel port, only printing is
available.
10

12 Page





SeitenGesamt 30 Seiten
PDF Download[ AR-M207 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
AR-M206DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUALSharp
Sharp
AR-M207DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUALSharp
Sharp
AR-M208DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUALSharp
Sharp

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche