Datenblatt-pdf.com


GE655 Schematic ( PDF Datasheet ) - Prosilica

Teilenummer GE655
Beschreibung USER MANUAL
Hersteller Prosilica
Logo Prosilica Logo 




Gesamt 30 Seiten
GE655 Datasheet, Funktion
prosilica
USER MANUAL
July 22, 2009
GE655
GE655C
Prosilica Inc. www.prosilica.com tel: 604.875.8855 fax: 604.875.8856
© 2009 Prosilica Inc. All rights reserved.






GE655 Datasheet, Funktion
GE655 User Manual
Mechanical
70-0015A-D
M3
3MM DEEP
6 PLCS TYP
26
80.1*
20.7*
50
26
Prosilica Inc.
51.3
All dimen sions are in mm.
* Add 0.3mm for color cameras due
to addition of I R blockin g filter.
39.1
Figure 1. GE SERIES mechanical dimensions.
4

6 Page









GE655 pdf, datenblatt
GE655 User Manual
Cleaning the Sensor
70-0015A-D
DO NOT CONTACT CLEAN SENSOR UNLESS ABSOLUTELY NECESSARY.
Identifying Debris
Debris on the image sensor or optical components will appear as a darkened area or smudge on
the image that does not move as the camera is moved. Do not confuse this with a pixel defect
which will appear as a distinct point.
Locating Debris
Before attempting to clean the image sensor, it is important to first determine that the problem is
due to debris on the sensor window. To do this you should be viewing a uniform image, such as
a piece of paper, with the camera. Debris will appear as a dark spot or dark region that does not
move as the camera is moved. To determine that the debris is not on the camera lens, rotate the
lens independent of the camera. If the spot moves as the lens moves, then the object is on the
lens -not on the image sensor- and therefore cleaning is not required. If the camera has an IR
filter, then rotate the IR filter. If the object moves then the particle is on the IR filter not the
sensor. If this is the case remove the IR filter carefully using a small flat head screw driver.
Clean both sides of the IR filter using the same techniques as explained below for the sensor
window.
DO NOT TOUCH ANY OPTICS WITH FINGERS. OIL FROM FINGERS CAN
DAMAGE FRAGILE OPTICAL COATINGS.
Cleaning with Air
If it is determined that debris is on the sensor window, then remove the camera lens, and blow
the sensor window directly with clean compressed air. If canned air is used, do not shake or tilt
the can prior to blowing the sensor. View a live image with the camera after blowing. If the
debris is still there, repeat this process. Repeat the process a number of times with increased
intensity until it is determined that the particulate cannot be dislodged. If this is the case then
proceed to the contact cleaning technique.
Contact Cleaning
Only use this method as a last resort. Use 99% laboratory quality isopropyl alcohol and clean
cotton swabs. Dampen the swab in the alcohol and gently wipe the sensor in a single stroke. Do
not reuse the same swab. Do not wipe the sensor if the sensor and swab are both dry. You must
wipe the sensor quickly after immersion in the alcohol, or glue from the swab will contaminate
the sensor window. Repeat this process until the debris is gone. If this process fails to remove
the debris, then contact Prosilica.
Prosilica Inc.
10

12 Page





SeitenGesamt 30 Seiten
PDF Download[ GE655 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
GE655USER MANUALProsilica
Prosilica
GE655CUSER MANUALProsilica
Prosilica

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche