Datenblatt-pdf.com


Z0K181-RA-10 Schematic ( PDF Datasheet ) - Superworld Electronics

Teilenummer Z0K181-RA-10
Beschreibung FERRITE CHIP BEADS
Hersteller Superworld Electronics
Logo Superworld Electronics Logo 




Gesamt 9 Seiten
Z0K181-RA-10 Datasheet, Funktion
FERRITE CHIP BEADS
Z0 SERIES
1. PART NO. EXPRESSION :
Z0K121-RB-10
(a)(b)(c) (d) (e)(f) (g)
(a) Series code
(b) Dimension code
(c) Material code
(d) Impedance code : 470 = 47ȍ
2. CONFIGURATION & DIMENSIONS :
A
D
(e) R : Reel
(f) Current : C = 300mA
(g) : 10 : RoHS Compliant
11 ~ 99 : Internal controlled number
B
Unit:m/m
ABCD
0.60±0.03 0.30±0.03 0.30±0.03 0.15±0.05
3. SCHEMATIC :
4. MATERIALS :
ba
Ag(100%)
Ni(100%)-1.5um(min.)
Sn(100%)-3.0um(min.)
(a) Body : Ferrite
(b) Termination : Ag/Ni/Sn
5. GENERAL SPECIFICATION :
a) Temp. rise : 30°C Max.
b) Rated current : Base on temp. rise
c) Storage temp. : -55°C to +125°C
d) Operating temp. : -55°C to +125°C ( include self-temp. rise )
e) Resistance to solder heat : 260°C.10secs
www.DataSheet4U.com
NOTE : Specifications subject to change without notice. Please check our website for latest information.
SUPERWORLD ELECTRONICS
(S)
PTE
11.08.2010
LTD
PG. 1






Z0K181-RA-10 Datasheet, Funktion
FERRITE CHIP BEADS
Z0 SERIES
9. SOLDERING AND MOUNTING :
9-1. Recommended PC Board Pattern
0.80
0.30
PC board should be designed so that products are not sufficient
under mechanical stress as warping the board.
Products shall be positioned in the sideway direction against
the mechanical stress to prevent failure.
9-2. Soldering
Mildly activated rosin fluxes are preferred. The minimum amount of solder can lead to damage from the stresses caused
by the difference in coefficients of expansion between solder, chip and substrate. The terminations are suitable for all
wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot
air soldering tools.
9-2.1 Lead Free Solder Re-flow :
Recommended temperature profiles for re-flow soldering in Figure 1.
9-2.2 Solder Wave :
Wave soldering is perhaps the most rigorous of surface mount soldering processes due to the steep rise in temperature
seen by the circuit when immersed in the molten solder wave. Due to the risk of thermal damage to products, wave
soldering of large size products is discouraged. Recommended temperature profile for wave soldering is shown
in Fig. 2
9-2.3 Soldering Iron (Figure 3) :
Products attachment with soldering iron is discouraged due to the inherent process control limitations. In the event that
a soldering iron must be employed the following precautions are recommended.
Note :
a) Preheat circuit and products to 150°C.
d) 1.0mm tip diameter (max)
b) 350°C tip temperature (max)
e) Use a 20 watt soldering iron with tip diameter of 1.0mm
c) Never contact the ceramic with the iron tip
f) Limit soldering time to 3 secs.
Preheating
TP(260°C/10s max.)
Soldering
20~40s
Natural
cooling
217
200
150 60~150s
60~180s
480s max.
25
Time(sec.)
Figure 1. Re-flow Soldering
Preheating
260
245
150
Soldering
Natural
cooling
Preheating
350
330
150
Soldering
3s
(max.)
10s
(max.)
Natural
cooling
Over 2min.
Gradual
Cooling
Within 10s
Figure 2. Wave Soldering
www.DataSheet4U.com
Over 1min.
Gradual
Cooling
Figure 3. Hand Soldering
NOTE : Specifications subject to change without notice. Please check our website for latest information.
SUPERWORLD ELECTRONICS
(S)
PTE
11.08.2010
LTD
PG. 6

6 Page







SeitenGesamt 9 Seiten
PDF Download[ Z0K181-RA-10 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
Z0K181-RA-10FERRITE CHIP BEADSSuperworld Electronics
Superworld Electronics
Z0K181-RA-11FERRITE CHIP BEADSSuperworld Electronics
Superworld Electronics

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche