|
|
PDF T520HW01-V3 Data sheet ( Hoja de datos )
| Número de pieza | T520HW01-V3 | |
| Descripción | Full HD Color TFT-LCD Module | |
| Fabricantes | AUO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de T520HW01-V3 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Global LCD Panel Exchange Center
www.panelook.com
Document Version: 0.0
Date: 2009/5/22
Product Functional Specification
52” Full HD Color TFT-LCD Module
Model Name: T520HW01 V3
(*) Preliminary Specification
() Final Specification
©Copyright AU Optronics Corp.
2009 All Rights Reserved.
No Reproduction and Redistribution Allowed
T520HW01 V3
2/33
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
1 page  
Global LCD Panel Exchange Center
www.panelook.com
2. Absolute Maximum Ratings
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Item
Logic/LCD Drive Voltage
Input Voltage of Signal
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Panel Surface Temperature
Shock (non-operation)
Shock (non-operation)
Vibration (non-operation)
Symbol
V DD
V IN
TOP
HOP
TST
HST
T SUR
±x, ±y
±z
Min.
-0.3
-0.3
0
10
-20
10
--
--
--
--
Max
14.0
3.6
+50
90
+60
90
+65
40
30
1.5
Unit
VDC
VDC
°C
%RH
°C
%RH
°C
G
G
G
Note
1
1
2
2
2
2
2
3
3
4
Note 1: Duration = 50ms
Note 2: Maximum Wet-Bulb should be 39°C and no condensation. The relative humidity must not exceed
90% non-condensing at temperatures of 40 °C or less. At temperatures greater than 40 °C, the wet
bulb temperature must not exceed 39 °C.
Note 3: Sine wave, 11ms, direction: ±x, ±y, ±z (one time each direction)
Note 4: Wave form: random, vibration level: 1.5G RMS, Bandwidth: 10--300Hz
Duration: X, Y, Z 30min (one time each direction)
Note 5: Surface temperature is measured at 50 Dry condition
©Copyright AU Optronics Corp.
2009 All Rights Reserved.
No Reproduction and Redistribution Allowed
T520HW01 V3
6/33
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
5 Page 
Global LCD Panel Exchange Center
www.panelook.com
3.3 MEMC function description
1. Setting by hardware
Pin name
Input/
Content
ouptut
Note
Default
MEMC ON/OFF Selection MEMC ON: 10 frames latency (~170ms) for
MEMC_ON *1
I 0: MEMC OFF
film FLC, MBR + video MBR
1
1: MEMC ON
MEME OFF: 1 frame latency (~16.7ms)
LVDS Format Selection
LVDS_FORMAT I 0: JEIDA Mode 10/8bits
1
1: NS Mode 8bits
SDA_MCU
I/O Internal I2C to control MEMC
1
SCL_MCU
I/O Internal I2C to control MEMC
SDA_E *2
External I2C from customer's When MCU gets external I2C signals from
I/O
comment
customer's comment, MCU will download
1
SCL_E *2
register setting for MEMC chip by
External I2C from customer's
I/O MCU_SDA and MCU_SCL. The sheet of
comment
register map shows detail register setting.
Note 1.
MEMC ON/OFF can also control by external I2C. If users want to change the setting, only need to change
hardware setting or provide external I2C command. Ex: When MEMC_ON of the hardware is L for MEMC OFF,
external I2C can set address=0x79 and data=0x00 for MEMC ON.
Note 2.
The next figure shows the I2C format of customer’s single-byte command. Ex. Address : 0x65.
START
0XE4 (*1)
ACK (*2)
Address
ACK
Data
ACK
STOP (*3)
The next figure shows the I2C format of customer ’s multi-byte command. Because of MCU buffer capacity
multi-byte command has 20 bytes limitation per one time. Ex. Address : 0x23.
START 0XE4
ACK
Add
ress
ACK
Data
(Byte 0)
ACK
Data
(Byte 1)
ACK
Data
(Byte 2)
ACK
Data
(Byte 3)
ACK
STOP
(*3)
Note (1)
Slave address of MEMC chip is 0x72 plus the least significant bit indicating a write (0xE4).
Note (2)
Shaded items are issued by the slave (MEMC chip).
Note (3)
The interval time between the two commands must longer than 100ms.
©Copyright AU Optronics Corp.
2009 All Rights Reserved.
No Reproduction and Redistribution Allowed
T520HW01 V3
12/33
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet T520HW01-V3.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| T520HW01-V0 | Full HD Color TFT-LCD Module | AUO |
| T520HW01-V3 | Full HD Color TFT-LCD Module | AUO |
| T520HW01-V4 | TFT-LCD PANEL | AUO |
| T520HW01-V5 | LCD Module | AUO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |