|
|
Teilenummer | GXB2000 |
|
Beschreibung | 16-Channel GPS Receiver Module | |
Hersteller | Sony Corporation | |
Logo | ||
Gesamt 60 Seiten 16-Channel GPS Receiver Module
GXB2000
Description
The GXB2000 is a 16-channel GPS receiver module. The GXB2000 is a small and light device, and it
includes all the functions required for GPS except for the antenna.
The GXB2000 can be support the various kinds of the portable applications as well as the car navigation system.
Features
• 16-channel GPS receiver capable of simultaneously receiving 16 satellites
• All-in-view measurement
• 2-satellite measurement
• D-GPS (Differential GPS)
RTCM
SC104 version 2.1
DARC
BTA R-003 standard
• Low current consumption (270mW, Typ)
• Small and light package type
• The countermeasure of EMI (electromagnetic wave impediment)
Recommended Operating Conditions
• Supply voltage (3V spec.) VDD 3.0 to 3.6
(5V spec.) VCC
4.5 to 5.5
• Operating temperature
Topr –40 to +85
V
V
°C
GPS (Global Positioning System) is the position measurrment system that the U.S. control and operate. It have some posibility of
the position measurement deterioration that depends on the working GPS.
It dose not gurantee the standard,etc in this material including the case above.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E99658-PS
GXB2000
Reception Unit Initialization and Operation
The GXB2000 operation is started by setting the reset input signal RESET (Pin 2) for the reception unit
initialization to high level. The timing should satisfy the conditions noted below.
During Power-on (power-on reset)
VDD = 3.0 to 3.6V, VCC = 4.5 to 5.5V, temperature = –40 to +85°C
VDD/VCC
Power
supply
GND
100ms or more
RESET (Pin 2)
VDD or VCC/2
Initialization During Operation
VDD = 3.0 to 3.6V, VCC = 4.5 to 5.5V, temperature = –40 to +85°C
VDD/VCC
Power supply
100µs or more
RESET (Pin 2)
VDD or VCC/2
GND
–6–
6 Page No.
BIT
76543210
Contents
35 0xxxxxxx Number of visible satellites
Value range: 0 to 32
36 0xxxxxxx Satellite Nos. used for measurement
37 0xxxxxxx 8 satellite Nos.
38 0xxxxxxx Value range: 0 to 32
39 0xxxxxxx Satellite No.: 0 is invalid.
40 0xxxxxxx
41 0xxxxxxx
42 0xxxxxxx
43 0xxxxxxx
44 0xxxxxxx Measurement calculation mode
0: Invalid
1: 2-satellite measurement
2: 3-satellite measurement
3: 4-(or more) satellite measurement
45 0xxxxxxx Geodesic system
Value range: 0 to 25
46 0xxxxxxx Measurement delay time
Resolution: 0.1s
Value range: 0 to 9
Information for 1st satellite
47 0xxxxxxx Satellite No.
Value range: 0 to 32
48 0xxxxxxx Azimuth
49 0xxxxxxx Resolution: 1°
Value range: 0 to 359°
50 0xxxxxxx Angle of elevation
Resolution: 1°
Value range: 0 to 90°
51 0xxxxxxx Reception status
0: Searching
1: Acquired
2: Usable for calculation
3: Radio waves cut off; interpolating
4: Satellite Unhealth
5: Currently being used for position calculation
52 0xxxxxxx Signal level
Resolution: 1dBHz
Value range: 0 to 100
53 to
Information for 2nd satellite
59 to
Information for 3rd satellite
65 to
Information for 4th satellite
71 to
Information for 5th satellite
S-4
GXB2000
Example
Setting value
Output data
(HEX)
8 08
4 04
10 0A
18 12
9 09
20 14
25 19
7 07
31 1F
1 01
18
0.4s
16
218°
56°
3
12
04
10
01
5A
38
03
100 64
12 Page | ||
Seiten | Gesamt 60 Seiten | |
PDF Download | [ GXB2000 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
GXB2000 | 16-Channel GPS Receiver Module | Sony Corporation |
GXB2000 | Industrys Smallest GPS Receiver Module | ETC |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |