Datenblatt-pdf.com


GXB1000 Schematic ( PDF Datasheet ) - ETC

Teilenummer GXB1000
Beschreibung Industrys Smallest GPS Receiver Module
Hersteller ETC
Logo ETC Logo 




Gesamt 2 Seiten
GXB1000 Datasheet, Funktion
Industry’s Smallest GPS Receiver Module
GXB1000
GXB2000
By adopting a newly developed DSP (the Sony CXD2931R) and high- s Industry’s smallest GPS receiver
density mounting technology, Sony has succeeded in developing the s Parallel 16-channel GPS receiver
that can receive signal from up
industry’s smallest mass produced GPS receiver.
to 16 GPS satellites at the same
In particular, the GXB2000 incorporates all the functionality except the
time.
antenna required for a GPS receiver on a mere 36.5 × 25.0 mm printed s Supports both all-in-view and
circuit board.
two-satellite positioning.
This receiver is not only for use in car navigation systems, but rather s Support for differential GPS
its significance lies in the point that it vastly expands the world of GPS
s
Thin-form ultralight pack-type
package
applications to a wide range of portable equipment.
s Measures for reducing EMI
(electromagnetic interference)
provided
Industry’s Smallest
GPS Receiver
By adopting a newly developed GPS
processor (the Sony CXD2931R) and
Sony’s unique high-level high-density
mounting technology, Sony has
succeeded in developing the industry’s
smallest mass produced GPS receiver.
The GXB2000 incorporates all the func-
tionality except the antenna required for
a GPS receiver on a 36.5 × 25.0 mm
printed circuit board. This allows a GPS
receiver to be incorporated easily into
portable equipment in which it was pre-
viously difficult to do so.
VOICE
Sixteen-Channel
GPS Receiver
The CXD2931R is capable of receiv-
ing signals from 16 satellites at the same
time. These 16 channels will become
useful when the number of GPS satel-
lites is increased from the current 27.
Support for multiple channels can
reduce the time to first fix (TTFF).
Both All-in-View and
Two-Satellite Positioning
These receivers adopt the all-in-view
positioning technique, in which data
from all satellites from which signals are
received is used in the positioning
calculation. This method increases the
positioning accuracy. They also support
the two-satellite positioning technique
that can increase the positioning success
ratio when signals can only be received
from two satellites in locations with
inferior reception conditions, such as on
streets with tall buildings.
Differential GPS Support
The differential GPS allows the posi-
tioning accuracy to increase approxi-
mately 10 times compared with GPS
alone by converting the correction data
from the GPS satellites obtained at the
base stations in the DARC or RTCM
format.
Thin-Form Ultralight Pack-
Type Package
Both the GXB1000 and the GXB2000
are provided in a shielded case that
achieves a thickness of a mere 7.4 mm.
Measures for Reducing
EMI (electromagnetic
interference) Provided
The generation of EMI is held to a mini-
mum by enclosing the whole GPS
receiver in a shielded case.
We designed this receiver based
on the idea that if made smaller,
GPS receivers could be used in a
wide range of applications in ad-
dition to in-car navigation sys-
tems. In the future, we will be aim-
ing for even smaller even lower
power receivers. Recently, I’ve
come to feel even more strongly
that GPS development has only
just begun.





SeitenGesamt 2 Seiten
PDF Download[ GXB1000 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
GXB1000Industrys Smallest GPS Receiver ModuleETC
ETC

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche