Datenblatt-pdf.com


VO205AT Schematic ( PDF Datasheet ) - Vishay

Teilenummer VO205AT
Beschreibung (VO205AT - VO208AT) Optocoupler
Hersteller Vishay
Logo Vishay Logo 




Gesamt 6 Seiten
VO205AT Datasheet, Funktion
www.vishay.com
VO205AT, VO206AT, VO207AT, VO208AT
Vishay Semiconductors
Optocoupler, Phototransistor Output, with Base Connection
in SOIC-8 Package
A1
8 NC
K2
7B
NC 3
6C
NC 4
5E
i179074
i179002-1
DVE
DESCRIPTION
The VO205AT, VO206AT, VO207AT, VO208AT are optically
coupled pairs with a gallium arsenide infrared LED and a
silicon NPN phototransistor. Signal information, including a
DC level, can be transmitted by the device while maintaining
a high degree of electrical isolation between input and
output. This family comes in a standard SOIC-8A small
outline package for surface mounting which makes them
ideally suited for high density application with limited space.
FEATURES
• High BVCEO, 70 V
• Isolation test voltage, 4000 VRMS
• Material categorization:
For definitions of compliance
www.vishay.com/doc?99912
please
see
AGENCY APPROVALS
• UL1577, file no. E52744 system code Y
• cUL - file no. E52744, equivalent to CSA bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5) approved, contact
customer service if this option is required
ORDERING INFORMATION
VO2 0 #AT
SIOC-8
AGENCY CERTIFIED/PACKAGE
UL, cUL
SOIC-8
PART NUMBER
40 to 80
VO205AT
63 to 125
VO206AT
CTR (%)
100 to 200
VO207AT
6.1 mm
160 to 320
VO208AT
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Peak reverse voltage
Forward continuous current
Peak forward current
Power dissipation
Derate linearly from 25 °C
1 μs, 300 pps
VR
IF
IFM
Pdiss
6V
60 mA
1A
90 mW
1.2 mW/°C
OUTPUT
Collector emitter breakdown voltage
Emitter collector breakdown voltage
Collector-base breakdown voltage
ICmax. DC
ICmax.
Power dissipation
Derate linearly from 25 °C
t < 1 ms
BVCEO
BVECO
BVCBO
ICmax. DC
ICmax.
Pdiss
70
7
70
50
100
150
2
V
V
V
mA
mA
mW
mW/°C
COUPLER
Isolation test voltage
Total package dissipation (LED and detector)
Derate linearly from 25 °C
VISO
Ptot
4000
240
3.3
VRMS
mW
mW/°C
Operating temperature
Storage temperature
Soldering time
Note
at 260 °C
Tamb
Tstg
Tsld
- 40 to + 100
- 40 to + 150
10
°C
°C
s
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
Rev. 1.2, 22-Nov-12
1 Document Number: 81957
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000






VO205AT Datasheet, Funktion
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000

6 Page







SeitenGesamt 6 Seiten
PDF Download[ VO205AT Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
VO205AT(VO205AT - VO208AT) OptocouplerVishay
Vishay

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche