|
|
PDF VML9062 Data sheet ( Hoja de datos )
| Número de pieza | VML9062 | |
| Descripción | Lithium Ion Battery | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de VML9062 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
VML9062
DESCRIPTION Lithium Ion Battery
EDITION 0 PAGE 1/5
1. Applicability
The specification is applicable to Lithium Ion Rechargeable
batteries
2. Ratings
2.1 Cell
2.1.1 Type of Cell
2.1.2 Cell Model
2.1.3 Cell Size
2.1.4 Cell Minimum capacity
2.1.5 Number of cell used
2.1.6 Cell UL Number
: Sealed Lithium-ion cylindrical
Recharge battery
: Panasonic CGR-B/T33SE(CGR18650CF)
: 18650
: 2250mAh
: 2P2S(4PCS)
: MH12210
2.2 Pack
2.2.1 Rated voltage
: 7.2V
2.2.2 Typical capacity
: 4500 mAh (32.4Wh)
2.2.3 Minimum capacity
2.2.4 Standard charge
: 4300 mAh (31Wh)(0.2C charging & 0.2C
discharging)
: 860mA x 8hours to 8.4V
2.2.5 Quick charge current
: 3000mA to 8.4V(200mA end)
2.2.6 Maximum charging voltage : 8.4V
2.2.7 Standard discharge
: 860mA (discharge end of 6.0V)
2.2.8 Maximum discharge current : 3500mA
2.2.9 Replace No.
: Samsung SB-L110A,SB-L160,SB-L320
2.2.10 Battery Pack Color
2.2.11 Operating temperature
2.2.12 Storage temperature
: Grey
: 0 - 45 (standard charge)
10 –45 (quick charge)
-20 - 60 (standard discharge)
: -20 - 50 (1 week)
-20 - 35 (6 months)
1 page  
DESCRIPTION Lithium Ion Battery
to recover capacity.
10. SAFETY DEVICE AND ABUSE REQUIREMENT
EDITION 0 PAGE 5/5
Circuitry protection as described below has been presented inside the
battery pack to insure safety in case of misuse.
Overcharge Voltage Protection
At a charge voltage greater than 4.3 0.1V per cell, the overcharge
protection should engage interrupting the charge current.
Over Discharge Protection
When a voltage less than 2.25 0.25V per cell is reached upon discharge,
the over discharge protection device should engage. The resulting
discharge current should be below 1µA.
Over Discharge/Short Circuit Protection
When discharge current exceeds 3.5A the over discharge current protection
should engage interrupting the discharge current.
Over Current Protection
When battery load current exceeds 5.2A at 20 , the Polyswitch (PTC) shall
trip abruptly to a highly resistive state limiting current to milliamps.
The device shall remain in the tripped state until the fault is corrected
or removed.
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet VML9062.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| VML9062 | Lithium Ion Battery | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |