|
|
Teilenummer | PD057VU1 |
|
Beschreibung | TFT LCD Module | |
Hersteller | PRIME VIEW | |
Logo | ||
Gesamt 18 Seiten Version : 3
P-511-328(V:3)
PD057VU1
TECHNICAL SPECIFICATION
MODEL NO. : PD057VU1
The content of this information is subject to be changed without notice.
Please contact PVI or its agent for further information.
Customer’s Confirmation
Customer
Date
By
Confirmed By
Prepared By
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd. Page:1
Note 5-2 , 5-3 : The definitions of U/D & R/L
P-511-328(V:3)
PD057VU1
R/L(PIN 30)= Low, U/D(PIN 31)= High
R/L(PIN 30)= High , U/D(PIN 31)= Low
Note 5-4 : PIN 32 must connect Ground. (Low)
5-2) Backlight driving
Connector type: JST BHR-03VS-1, PIN No 2 pins, pitch=3.5mm
Pin No Symbol
Description
Remark
1 VHigh Power supply for lamp (High voltage side) Red
- NC This is electrically opened
-
3 VLow Power supply for lamp (Low voltage side) White
Note 5-11: Low voltage side of backlight inverter connects with ground of inverter circuits.
6.Absolute Maximum Ratings:
GND=0V, Ta=25℃
Parameters
Symbol Condition MAX.
Unit
Input Voltage
VI
Ta=25℃ -0.3~+4
V
+3.3V supply voltage VCC Ta=25℃ 0~+3.6 V
Note6-1:CK,R0~R5,G0~G5,B0~B5,Hsync,Vsync,ENAB,R/L,U/D,V/Q
Remark
Note6-1
7.Electrical Characteristics
7-1) Recommended Operating Conditions:
GND=0V, Ta=25℃
Item
+3.3V Supply Voltage
Permissive input ripple voltage
Input voltage(Low)
Input voltage(High)
Symbol
VCC
VRF
VIL
VIH
Min.
+3.0
-
0
0.7 VCC
Typ.
+3.3
-
-
-
Max. Unit Remark
+3.6 V
100 mVp-p VCC=3.3V
0.3 VCC V
VCC V
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd. Page:6
6 Page 11. Power On Sequence
3.0V
0.3V
VDD
Signal*3
P-511-328(V:3)
PD057VU1
3.0V
t1
1. 0<t1≦20ms
2. 0<t2≦50ms
3. 0<t3≦1s
t2
t3
12. Optical Characteristics
12-1) Specification:
Parameter
Horizontal
Viewing
Angle
Vertical
Symbol
θ
θ(to 6
o’clock)
θ(to 12
o’clock)
Condition
CR≧10
MIN.
55
45
TYP.
60
MAX.
-
Ta=25℃
Unit Remarks
deg Note 12-1
50 - deg
35 40
- deg
Contrast Ratio
Response time
Rise
Fall
Brightness
Luminance Uniformity
White Chromaticity
Lamp Life Time
CR At optimized 200 400
viewing angle
-
- Note 12-2
Tr
θ=0°
-
15
30
ms
Note 12-3
Tf - 25 50 ms
- θ=0°/φ=0 450 500 - cd/㎡ Note 12-4
U% 75 80 - % Note 12-5
x 0.29 0.32 0.35 -
y 0.33 0.36 0.39 -
-
- 45000 -
hr At=5mA
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd. Page:12
12 Page | ||
Seiten | Gesamt 18 Seiten | |
PDF Download | [ PD057VU1 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
PD057VU1 | TFT LCD Module | PRIME VIEW |
PD057VU2 | TFT LCD Module | PRIME VIEW |
PD057VU4 | TECHNICAL SPECIFICATION | AZ Displays |
PD057VU5 | Display Module | PRIME VIEW |
PD057VU6 | Display Module | Prime View |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |