|Beschreibung||FINE OVEN Instruction Manual|
Gesamt 30 Seiten
Model DF411 DF611
• Thank you for purchasing the Yamato Scientific DF/DH fine oven.
• For correct use of this Fine oven, read this manual and the guarantee thoroughly before use.
After reading them, keep the manual and the guarantee in a safe place for quick reference
WARNING: Before using this product, carefully read and fully understand the instructions
on safety . (WARNINGS and CAUTIONS) that appears elsewhere in this
Be sure to follow the instructions and requirements on safety described in this manual when
handling the product. Yamato Scientific Co., Ltd. assumes no liability for customer failure to
comply with these instructions and requirements.
Yamato Scientific Co., LTD.
This paper has been printed on recycled paper.
EXPLANATIONS ABOUT SYMBOL MARKS
Prohibit to use in the following locations, where a flammable or explosive gas is present.
Never to use this product in the locations as a flammable or an explosive gas is present.
If not, It may cause a fire or an explosion, because this product is not expansion-proof.
Always connect the protective grounding wire to the ground.
Connect the ground-line correctly. This could cause a fire or an electrical shock due to
Prohibit to use in unusual operation.
If the smoke or unusual smell come up, turn-off the power switch immediately and
disconnect the power plug from the receptacle. This could cause a fire or an electrical shock.
Do not use the power cord tie up in a bundle.
This could cause to a fire from over heat of the power cord.
Do not injure the power cord.
Do not bend or twist or tug the power cord forcibly. This could cause a fire or an electrical
Do not use samples containing a flammable or explosive substance.
Never to use samples containing a flammable or explosive substance. This could cause a fire
or an explosion.
Do not disassemble and make modifications this product.
Do not disassemble and make modifications this product. This could cause a failure or a fire
or an electrical shock.
Do not touch the door during or immediately after operation
Do not touch the door during or immediately after operation. Severe burning injury may be
caused due to the high temperature
When thunder is coming.
When it thunders, turn off the power switch immediately. This could cause a failure or a fire
or an electrical shock.
･Requirements for Installation
BEFORE USING IT
Handling of power code.
・Do not use the power cord if it is bundled or tangled. If it is used in this manner, it
can overheat and fire may be caused.
・Do not process, bend, wring, or stretch the power cord forcibly. Fire or electrical
shock may result.
・Do not put the power cord under the desk,chair,etc.,or through an object. Fire or
electrical shock may be caused.
・Do not run the power cord next to heating equipment such as a heater. The cover of
the cord may melt and fire or electrical shock may result.
・When the power cord is damaged (exposure of the core wires,disconnection,etc.),turn
off the power key right immediately,then turn off the circuit breaker and the main
power.Contact customer service for a replacement immediately. If this procedure is
not followed,fire or electrical shock may be caused.
Caution in setting shelves
・Do not use any shelves but the attached ones.
・If it is used in this manner, the oven cannot occasionally regulate temperatures
・Put the attached shelves on the shelf brackets fitted to the chamber when you use
|Seiten||Gesamt 30 Seiten|
|PDF Download||[ DH611 Schematic.PDF ]|
|DH611||FINE OVEN Instruction Manual|
|DH61BE||Desktop Board Technical Product Specification|
|DH61BE||Desktop Board Guide|
Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.
EPITAXIAL PLANAR NPN TRANSISTOR.
|www.Datenblatt-PDF.com | 2020 | Kontakt | Suche|