|
|
Teilenummer | NV4V31MF |
|
Beschreibung | Blue-Violet Laser Diode 405nm Blue-Violet Laser Light Source | |
Hersteller | California Eastern Labs | |
Logo | ||
Gesamt 9 Seiten NV4V31MF
Blue-Violet Laser Diode
405 nm Blue-Violet Laser Light Source
A Business Partner of Renesas Electronics Corporation.
Preliminary
Data Sheet
R08DS0045EJ0200
Rev.2.00
Jun 20, 2013
DESCRIPTION
The NV4V31MF is a blue-violet laser diode with a wavelength of 405 nm. A newly developed LD chip structure
achieves a high optical power output of 175 mW (CW) at up to 85°C. The NV4V31MF can provide excellent linearity
from low to high output at high temperatures, and reduces the unevenness of beam divergence.
FEATURES
• High optical output power
• Peak emission wavelength
<R> • Single transverse mode (lateral)
• Wide operating temperature range
• φ 3.8 mm small CAN package
Po = 175 mW @CW
λp = 405 nm TYP.
TC = −5 to +85°C
APPLICATIONS
• Blue-violet laser light source
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
R08DS0045EJ0200 Rev.2.00
Jun 20, 2013
Page 1 of 7
NV4V31MF
A Business Partner of Renesas Electronics Corporation.
Chapter Title
<R> NOTES ON HANDLING
1. Recommended soldering conditions
• Peak Temperature
≤ 350°C
• Time
≤ 3 seconds
• Soldering of leads should be made at the point 2.0 mm from the root of the lead
• This device cannot be mounted using reflow soldering.
2. Usage cautions
(1) Take the following steps to ensure that the device is not damaged by static electricity.
• Wear an antistatic wrist strap when soldering the device.
We recommend a strap with a 1 MΩ resistor.
• Make sure that the work table and soldering iron are grounded.
• Make sure that the soldering iron does not leak.
(2) Do not subject the package to undue stress.
The package has a tensile strength of 1N or less.
Do not exceed this rating. Also, avoid bending the leads as much as possible.
If the leads must be bent, bend them only once, making sure to anchor the stem base of the lead.
(3) Do not allow the cap glass of the package to become scratched or dirty.
Also, do not subject the cap glass to external force.
(4) Be sure to attach a heat sink to sufficiently dissipate heat.
(5) Use the device as soon as possible after opening the bag.
R08DS0045EJ0200 Rev.2.00
Jun 20, 2013
Page 6 of 7
6 Page | ||
Seiten | Gesamt 9 Seiten | |
PDF Download | [ NV4V31MF Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
NV4V31MF | Blue-Violet Laser Diode 405nm Blue-Violet Laser Light Source | California Eastern Labs |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |