Datenblatt-pdf.com


PEMB15 Schematic ( PDF Datasheet ) - NXP Semiconductors

Teilenummer PEMB15
Beschreibung PNP/PNP resistor-equipped transistors
Hersteller NXP Semiconductors
Logo NXP Semiconductors Logo 




Gesamt 14 Seiten
PEMB15 Datasheet, Funktion
PEMB15; PUMB15
PNP/PNP resistor-equipped transistors;
R1 = 4.7 k, R2 = 4.7 k
Rev. 5 — 16 December 2011
Product data sheet
1. Product profile
1.1 General description
PNP/PNP double Resistor-Equipped Transistors (RET) in Surface-Mounted
Device (SMD) plastic packages.
Table 1. Product overview
Type number Package
NXP
JEITA
PEMB15
SOT666 -
PUMB15
SOT363 SC-88
NPN/PNP
complement
PEMD15
PUMD15
NPN/NPN
complement
PEMH15
PUMH15
Package
configuration
ultra small and flat lead
very small
1.2 Features and benefits
100 mA output current capability
Built-in bias resistors
Simplifies circuit design
Reduces component count
Reduces pick and place costs
AEC-Q101 qualified
1.3 Applications
Low current peripheral driver
Control of IC inputs
Replaces general-purpose transistors in digital applications
1.4 Quick reference data
Table 2. Quick reference data
Symbol Parameter
Per transistor
VCEO
IO
R1
collector-emitter voltage
output current
bias resistor 1 (input)
R2/R1
bias resistor ratio
Conditions
open base
Min Typ Max Unit
- - 50 V
- - 100 mA
3.3 4.7 6.1 k
0.8 1
1.2






PEMB15 Datasheet, Funktion
NXP Semiconductors
PEMB15; PUMB15
PNP/PNP resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k
7. Characteristics
Table 8. Characteristics
Tamb = 25 C unless otherwise specified.
Symbol Parameter
Conditions
Min
Per transistor
ICBO
collector-base cut-off VCB = 50 V; IE = 0 A
current
-
ICEO
IEBO
collector-emitter cut-off
current
emitter-base cut-off
current
VCE = 30 V; IB = 0 A
VCE = 30 V; IB = 0 A;
Tj = 150 C
VEB = 5 V; IC = 0 A
-
-
-
hFE
VCEsat
DC current gain
collector-emitter
saturation voltage
VCE = 5 V; IC = 10 mA
IC = 10 mA; IB = 0.5 mA
30
-
VI(off)
VI(on)
R1
off-state input voltage
on-state input voltage
bias resistor 1 (input)
VCE = 5 V; IC = 100 A
VCE = 0.3 V;
IC = 20 mA
-
2.5
3.3
R2/R1 bias resistor ratio
0.8
Cc
collector capacitance VCB = 10 V; IE = ie = 0 A;
-
f = 1 MHz
fT
transition frequency
VCE = 5 V; IC = 10 mA; [1] -
f = 100 MHz
[1] Characteristics of built-in transistor
Typ Max Unit
- 100 nA
- 1 A
- 5 A
- 900 A
--
- 150 mV
1.1 0.5 V
1.9 -
V
4.7 6.1 k
1 1.2
- 3 pF
180 -
MHz
PEMB15_PUMB15
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 16 December 2011
© NXP B.V. 2011. All rights reserved.
6 of 14

6 Page









PEMB15 pdf, datenblatt
NXP Semiconductors
PEMB15; PUMB15
PNP/PNP resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k
13. Legal information
13.1 Data sheet status
Document status[1][2]
Objective [short] data sheet
Preliminary [short] data sheet
Product [short] data sheet
Product status[3]
Development
Qualification
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
13.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
PEMB15_PUMB15
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 16 December 2011
© NXP B.V. 2011. All rights reserved.
12 of 14

12 Page





SeitenGesamt 14 Seiten
PDF Download[ PEMB15 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
PEMB1PNP resistor-equipped transistors; R1 = 22 kohm/ R2 = 22 kohmNXP Semiconductors
NXP Semiconductors
PEMB10PNP resistor-equipped double transistor R1 = 2.2 kohm/ R2 = 47 kohmNXP Semiconductors
NXP Semiconductors
PEMB11PNP resistor-equipped transistors; R1 = 10 kohm/ R2 = 10 kohmNXP Semiconductors
NXP Semiconductors
PEMB13PNP/PNP resistor-equipped transistorsNXP Semiconductors
NXP Semiconductors
PEMB14PNP/PNP resistor-equipped transistorsNXP Semiconductors
NXP Semiconductors

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche