Datenblatt-pdf.com


L3200AFC Schematic ( PDF Datasheet ) - LG

Teilenummer L3200AFC
Beschreibung COLOR MONITOR SERVICE MANUAL
Hersteller LG
Logo LG Logo 




Gesamt 44 Seiten
L3200AFC Datasheet, Funktion
Website:http://biz.LGservice.com
E-mail:http://www.LGEservice.com/techsup.html
COLOR MONITOR
SERVICE MANUAL
CHASSIS NO. : CL-70
MODEL:
L3200A (L3200AC.AL**A)
L3200A (L3200ATC.AL**A)
L3200A (L3200AFC.AL**A)
L3200A (L3200AKC.AL**A)
( ) **Same model for Service
CAUTION
BEFORE SERVICING THE UNIT,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
http://www.DataSheet4U.net/
datasheet pdf - http://www.DataSheet4U.net/






L3200AFC Datasheet, Funktion
Circuit Board Foil Repair
Excessive heat applied to the copper foil of any printed
circuit board will weaken the adhesive that bonds the foil
to the circuit board causing the foil to separate from or
"lift-off" the board. The following guidelines and
procedures should be followed whenever this condition is
encountered.
At IC Connections
To repair a defective copper pattern at IC connections use
the following procedure to install a jumper wire on the
copper pattern side of the circuit board. (Use this
technique only on IC connections).
1. Carefully remove the damaged copper pattern with a
sharp knife. (Remove only as much copper as
absolutely necessary).
2. carefully scratch away the solder resist and acrylic
coating (if used) from the end of the remaining copper
pattern.
3. Bend a small "U" in one end of a small gauge jumper
wire and carefully crimp it around the IC pin. Solder the
IC connection.
4. Route the jumper wire along the path of the out-away
copper pattern and let it overlap the previously scraped
end of the good copper pattern. Solder the overlapped
area and clip off any excess jumper wire.
At Other Connections
Use the following technique to repair the defective copper
pattern at connections other than IC Pins. This technique
involves the installation of a jumper wire on the
component side of the circuit board.
1. Remove the defective copper pattern with a sharp
knife.
Remove at least 1/4 inch of copper, to ensure that a
hazardous condition will not exist if the jumper wire
opens.
2. Trace along the copper pattern from both sides of the
pattern break and locate the nearest component that is
directly connected to the affected copper pattern.
3. Connect insulated 20-gauge jumper wire from the lead
of the nearest component on one side of the pattern
break to the lead of the nearest component on the
other side.
Carefully crimp and solder the connections.
CAUTION: Be sure the insulated jumper wire is
dressed so the it does not touch components or sharp
edges.
http://www.DataSheet4U.net/
-6-
datasheet pdf - http://www.DataSheet4U.net/

6 Page









L3200AFC pdf, datenblatt
Windows EDID V1.0 User Manual
Operating System: MS Windows 98, 2000, XP
Port Setup: Windows 98 => Dont need setup
Windows 2000, XP => Need to Port Setup.
This program is available to LCD Monitor only.
1. Port Setup
a) Copy UserPort.sysfile to
c:\WINNT\system32\driversfolder
b) Run Userport.exe
2. EDID Read & Write
1) Run WinEDID.exe
c) Remove all default number
d) Add 300-3FF
2) Edit Week of Manufacture, Year of Manufacture,
Serial Number
a) Input User Info Data
b) Click Updatebutton
c) Click Writebutton
http://www.DataSheet4U.net/
e) Click Start button.
f) Click Exit button.
- 12 -
datasheet pdf - http://www.DataSheet4U.net/

12 Page





SeitenGesamt 44 Seiten
PDF Download[ L3200AFC Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
L3200AFCCOLOR MONITOR SERVICE MANUALLG
LG

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche