|
|
Teilenummer | TA8409S |
|
Beschreibung | BRIDGE DRIVER | |
Hersteller | Toshiba Semiconductor | |
Logo | ||
Gesamt 12 Seiten TA8409S/SG, F/FG
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA8409S/SG, TA8409F/FG
Bridge Driver
The TA8409S/SG and TA8409F/FG are bridge drivers with
output voltage control.
Features
z Modes available (CW/CCW/STOP/BRAKE)
z Output current up to 0.4 A (AVE) and 1.0 A (PEAK)
z Wide range of operating voltages
VCC (opr.) = 4.5 to 20 V
VS (opr.) = 0 to 20 V
Vref (opr.) = 0 to 20 V (Vref ≤ VS)
z Built-in thermal shutdown
z Standby mode available (STOP MODE)
z Hysteresis for all inputs.
TA8409S/SG
TA8409F/FG
TA8409FG/SG:
The TA8409FG/SG is a Pb-free product.
The following conditions apply to solderability:
*Solderability
1. Use of Sn-63Pb solder bath
*solder bath temperature = 230°C
*dipping time = 5 seconds
*number of times = once
*use of R-type flux
2. Use of Sn-3.0 Ag-0.5 Cu solder bath
*solder bath temperature = 245°C
*dipping time = 5 seconds
*the number of times = once
*use of R-type flux
Weight
SIP9−P−2.54A: 0.92 g (typ.)
SSOP10−P−225−1.00: 0.09 g (typ.)
1 2003-08-12
Test Circuit 3
VSAT U−1, 2, VSAT L−1, 2, VSAT U−1’, 2’
TA8409S/SG, F/FG
TA8409S/SG, F/FG
Note: Calibrate IOUT to 0.2/0.4 A by RL.
Test Circuit 4
IL U, L
TA8409S/SG, F/FG
Test Circuit 5
VF U−1, 2, VF L−1, 2
TA8409S/SG, F/FG
TA8409S/SG, TA8409F/FG
TA8409S/SG, TA8409F/FG
6 2003-08-12
6 Page Counter-electromotive force
TA8409S/SG, F/FG
When the motor reverses or stops, counter-electromotive force in the motor may influence the current to flow
to the power source. If the power source lacks sink capability, the IC power and output pins may exceed the
rating. The counter-electromotive force of the motor varies depending on the conditions of use and the features
of the motor.
Therefore ensure that there is no damage to the IC or problem in operation, and no error in or damage to
peripheral circuits resulting from counter-electromotive force.
RESTRICTIONS ON PRODUCT USE
030619EBA
• The information contained herein is subject to change without notice.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of
TOSHIBA or others.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
• The products described in this document are subject to the foreign exchange and foreign trade laws.
• TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced
and sold, under any law and regulations.
12 2003-08-12
12 Page | ||
Seiten | Gesamt 12 Seiten | |
PDF Download | [ TA8409S Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
TA8409 | BRIDGE DRIVER | Toshiba Semiconductor |
TA8409F | BRIDGE DRIVER | Toshiba Semiconductor |
TA8409FG | BRIDGE DRIVER | Toshiba Semiconductor |
TA8409S | BRIDGE DRIVER | Toshiba Semiconductor |
TA8409SG | BRIDGE DRIVER | Toshiba Semiconductor |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |