|
|
PDF LX-MV-128LED-D Data sheet ( Hoja de datos )
| Número de pieza | LX-MV-128LED-D | |
| Descripción | Microwave Sensor Lamp Instruction | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LX-MV-128LED-D (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
LX-MV-128LED-D Microwave Sensor Lamp Instruction
Packing list in Quantity
Microwave Sensor Lamp 1X
Φ6 Plastic Expansion
3x30 Screw
Instruction
4X
4X
1X
IP 44
Summary
This is a newly designed intelligent ceiling mount Microwave sensor LED lamp,
with the extra function of power supply in emergency. The lighting is
auto-managed by AC direct power or battery backup, that is, when power failure,
the battery backup will be responsible for the power supply of 8 watt. The battery
backup can continuously supply power for more than 2 hours or even more in the
sensor energy-saving mode. It is widely applied in the corridor, washing room,
elevator lobby etc.
This product is designed with two configurations: one is the sensor lamp with the
function of supplying power in emergency and the other one is the intelligent
sensor lamp without the emergency function. You can make purchase according
to the practical need. But in most cases, it is necessary and wise to choose the
former one, for that the occasional power outage will cause trouble, or even
danger.
Use high quality PC lampshade.Strengthen the flexible refraction
of light.And its function of anti-ultraviolet makes the shade not
easy to turn yellow and be broken.
Name of each part
Mounting holes Threading hole
LED lamp consumes power 80% less
than incandescent lamp and 50% less
than fluorescent lamp.
Battery
Mounting holes
Microwave sensor
Knob
Wiring
Mounting holes
Mounting holes
Specifications
Power source: 100-240V/AC 50/60Hz
Rated LED: 28W Max.(AC)
8W Max.(DC)
Charging Power:7W Max.(light off)
3W Max.(light on)
HF system: 5.8GHz
Battery: 7.4V / 2000mAH lithium battery
Continuous illumination time: ≥120min
(when the battery power supply)
Lampshade
Transmission power: <0.2mW
Time setting: 8sec to 12min (adjustable)
Detection range: 1-8m (radii.) (adjustable)
Light-control: 10-2000LUX(adjustable)
Detection angle: 360°
Installation height: 2.5-3.5m (ceiling mount)
Working Temperature:-20~+55℃
LED quantity: 216PCS
LED specifications: FM-3528WNS
1 page  
• Step1 Seperate the lamp into two parts:A and B.
Fig.7 A
B
• Step2 Turn the knobs to the ideal conditions
(Please define the settings as per the above FUNCTION part mentioned.).
• Step3 Put the base of the product on the ceiling to make the drilling mark (as Fig.8)
• Step4 Install the product on the place where you marked (as Fig.9)
Products should be installed more than 4 meters one from the other,
otherwise the interference among them will cause error action.
Fig.8 Fig.9
• Step5 Knock the plastic expansion screw into the hole which you drill (as Fig.10)
• Step6 Put the power line through the line hole to connect on the wiring (as Fig.11)
Ceiling
Fig.10
Fig.11
• Step7 Fix the base of the product on the selected place with the screws (as Fig.12)
40mm
10mm
Fig.12
Concrete ceiling
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet LX-MV-128LED-D.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LX-MV-128LED-D | Microwave Sensor Lamp Instruction | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |