Datenblatt-pdf.com


RT100KP130A Schematic ( PDF Datasheet ) - Microsemi Corporation

Teilenummer RT100KP130A
Beschreibung Preferred 100 kW Transient Voltage Suppressor
Hersteller Microsemi Corporation
Logo Microsemi Corporation Logo 




Gesamt 4 Seiten
RT100KP130A Datasheet, Funktion
SCOTTSDALE DIVISION
RT100KP33A thru RT100KP400CA, e3
Preferred 100 kW Transient Voltage
Suppressor for AIRCRAFT POWER
BUS PROTECTION
DESCRIPTION
Microsemi’s 100 kW Transient Voltage Suppressors (TVSs) are designed
for aircraft applications requiring high power transient protection with a
comparatively small axial-leaded package size. This includes various
threats such as “Waveform 4” at 6.4/69 µs per RTCA/DO-160E Section 22.
It is also available with screening in accordance with MIL-PRF-19500 or
avionics screening as described in the Features section herein. It may also
be optionally acquired with RoHS Compliant (annealed matte-Tin finish)
www.DataSheet4Uw.ciothm an e3 suffix added to the part number. Microsemi also offers a broad
spectrum of other TVSs to meet your needs.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
APPEARANCE
FEATURES
Available in both Unidirectional and Bidirectional
construction (Bidirectional with CA suffix)
TVS selection for 33 to 400 V Standoff Voltages (VWM)
Suppresses transients up to 100 kW @ 6.4/69 μs
Fast response with less than 5 ns turn-on time.
Optional 100% screening for avionics grade is available
by adding MA prefix to part number for added 100%
temperature cycle -55oC to +125oC (10X), surge (3X) in
each direction, 24 hours HTRB in each direction, and post
test (VBR and ID)
Options for screening in accordance with MIL-PRF-19500
for JAN, JANTX, and JANTXV are also available by adding
MQ, MX, or MV prefixes respectively to part numbers.
Moisture classification is Level 1 with no dry pack required
per IPC/JEDEC J-STD-020B.
RoHS Compliant devices available by adding “e3” suffix
APPLICATIONS / BENEFITS
Protection from high power switching transients,
induced RF, and lightning threats with comparatively
small package size (0.25 inch diameter)
Protection from ESD and EFT per IEC61000-4-2 and
IEC61000-4-4
Pin injection protection per RTCA/DO-160E up to
Level 4 for Waveform 4 (6.4/69 µs) on all devices
Pin injection protection per RTCA/DO-160E up to
Level 5 for Waveform 4 (6.4/69 µs) on device types
RT100KP33A or CA up to RT100KP260A or CA
Pin injection protection per RTCA/DO-160E up to
Level 3 for Waveform 5A (40/120 µs) on all devices
Pin injection protection per RTCA/DO-160E up to
Level 4 for Waveform 5A (40/120 µs) on device types
RT100KP33A or CA up to RT100KP64A or CA
Consult Factory for other voltages with similar Peak
Pulse Power capabilities.
MAXIMUM RATINGS
Peak Pulse Power dissipation at 25ºC: 100 kW at 6.4/69 µs
waveform in Figure 8 (also see figures 1 and 2)
Impulse repetition rate: 0.005%
tclamping (0 volts to VBR min): <100 ps theoretical for
unidirectional and <5 ns for bidirectional
Operating & storage temperatures: -65oC to +150oC
Thermal resistance: 17.5C/W junction to lead, or 77.5C/W
junction to ambient when mounted on FR4 PC board with 4
mm2 copper pads (1 oz ) and track width 1 mm, length 25
mm
Steady-state power dissipation: 7 Watts @ TL = 27.5oC or
1.61 Watts at TA =25 oC when mounted on FR4 PC Board
described for thermal resistance above
Forward surge: 250 Amps 8.3 ms half-sine wave for
unidirectional devices only
Solder Temperatures: 260oC for 10 s maximum
MECHANICAL & PACKAGING
CASE: Void free transfer molded thermosetting
epoxy meeting UL94V-O requirements
FINISH: Tin-Lead or RoHS Compliant matte-Tin
plating solderable per MIL-STD-750, method 2026
Polarity: Cathode marked with band for
unidirectional (no band required for bi-directional)
MARKING: Manufacturers logo and part number.
Add prefix MA, MQ, MX, etc., for screened parts.
WEIGHT: 1.7 grams (approximate)
TAPE & REEL option: Standard per EIA-296 for
axial package (add “TR” suffix to part number)
Package dimensions: See last page
Copyright © 2007
10-03-2007 Rev B
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1





SeitenGesamt 4 Seiten
PDF Download[ RT100KP130A Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
RT100KP130APreferred 100 kW Transient Voltage SuppressorMicrosemi Corporation
Microsemi Corporation
RT100KP130ATRANSIENT VOLTAGE SUPPRESSORSEIC
EIC

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche