PDF HT1000 Data sheet ( Hoja de datos )

Número de pieza	HT1000
Descripción	Entertainment Projector User Manual
Fabricantes	NEC
Logotipo
Hay una vista previa y un enlace de descarga de HT1000 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas
No Preview Available ! HT1000 Entertainment Projector User’s Manual http://www.Datasheet4U.com 1 page HT1000 Entertainment Projector User’s Manual English Deutsch Français Italiano Español Svenska 5 Page Top Features 9 10 45 11 2 6 7 8 12 1 3 1. POWER Button (ON / STAND BY) ( ) Use this button to turn the power on and off when the main power is supplied and the projector is in standby mode. NOTE: To turn on or off the projector, press and hold this button for a mini- mum of two seconds. 2. STATUS Indicator If this light blinks red rapidly, it indicates that an error has occurred, the lamp cover is not attached properly or the projector has o ver- heated. If this light remains orange, it indicates that you have pressed a cabinet key while the Control Panel Key Lock is enabled. See the Status Indicator section on page E-50 for more details. 3. POWER Indicator When this indicator is green, the projector is on; when this indicator is orange, it is in standby or idle mode. See the Power Indicator sec- tion on page E-50 for more details. 4. SOURCE Button Use this button to select a video source such as aVCR, DVD player, PC or Viewer (PC card). Press and release this button quickly to display the Source List. Each time this button is pressed for a minimum of ONE second the input source will change as follows: Video → S-Video → Component → RGB → DVI (DIGIT AL) → Viewer → Video → ... If no input signal is present, the input will be skipped. 5. AUTO ADJUST Button Use this button to adjust Position-H/V and Pixel Clock/Phase for an optimal picture. Some signals may not be displayed correctly or take time to switch between sources. NOTE: This function may not be available depending upon the input signal. 7. ENTER Button Executes your menu selection and activates items selected from the menu. 8. CANCEL Button Press this button to exit "Menus". Press this button to return the ad- justments to the last condition while y ou are in the adjustment or setting menu. 9. SELECT ̆̄̇̈ (+) (–) / Volume Buttons ̆̄ : Use these buttons to select the menu of the item you wish to adjust. When no menus appear, these buttons work as a vol- ume control. ̇̈ : Use these buttons to change the level of a selected menu item. A press of thë button executes the selection.When the menus or the Viewer tool bar is not displa yed, these buttons can be used to select a slide , or to move the cursor in F older List or Slide List. 10. MENU Button Displays the menu. 11. LAMP Indicator If this light blinks red rapidly, it's warning you that the projection lamp has exceeded 1500 hours (up to 2000 hours in Eco mode) of sevrice. After this light appears, replace the lamp as soon as possib le. (See page E-48). If this is lit g reen contin ually, it indicates that the lamp mode is set to Eco. See the Lamp Indicator section on page E-50 of r more details. 12. 3D REFORM Button Press this button to enter 3D Refor m mode to correct the k eystone (trapezoidal) distortion, and make the image square. 6. PC CARD Access Indicator Lights while accessing a PC card. E-7 11 Page

Páginas	Total 30 Páginas
PDF Descargar	[ Datasheet HT1000.PDF ]

Hoja de datos destacado

Número de pieza	Descripción	Fabricantes
HT1000	Satellite Modem User Guide Manual	Hughes Network Systems
HT1000	Entertainment Projector User Manual	NEC
HT1000	GNSS Navigation Management System Pilot Guide Manual	Honeywell

Número de pieza	Descripción	Fabricantes
SLA6805M	High Voltage 3 phase Motor Driver IC.	Sanken
SDC1742	12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.	Analog Devices

DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.

DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar