|
|
Número de pieza | BII112S-20000 | |
Descripción | ROTOR DIMENSIONS | |
Fabricantes | ETC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de BII112S-20000 (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
No Preview Available ! ROTOR DIMENSIONS
iMODEL B I 112S/20000
GH
AA-225857/01
A *1
B
C
D
E *2
114.5+0.2/-0
(114.2+0.01/-0.01)
89
84
80
74
(Ef+0.01/-0.01)
I
G
H
I
11
113
135+2/-2
Unit: mm
¥Note¥
*1) After shrink-fitting the rotor to the spindle, apply finish machining to outer surface of the rotor and each part
bearings to be placed at the same process. Final finishing diameter is 114.2 +0.01/-0.01.
*2)Before shrink-fitting, apply finish machining to rotor bore within the dimension of Ef +0.01/-0.01. "Ef" could be
from 74.4 to 77 , so please choose the value. When machining, please refer to the reference figure below.
*3) To assemble the shaft and rotor, apply shrink-fitting at maximum 200 degrees centigrade. Ideally, within 180
degrees centigrade. Interference should be 60 - 90 micro meters in the case of 20,000 min-1.
*4)When you machine the rotor with coolant, please dry up after machining.
*5) To balance the spindle, please prepare another ring on each side of the rotor. Be sure not cut or drill the rotor to
balance the spindle.
MACHINING ROTOR BORE (reference)
Gauge
Rotor
FINISH DIMENSION OF SPINDLE
*The parameter of Ef must be the same value as
the value of rotor bore.
1.6S
Chuck
Jig
When machining the rotor bore, please hold the
outer surface of a rotor with a jig shown above.
If you hold the rotor bore, it may be deformed.
Non-magnetic rings for balance
http://www.Datasheet4U.com
1 page |
Páginas | Total 1 Páginas | |
PDF Descargar | [ Datasheet BII112S-20000.PDF ] |
Número de pieza | Descripción | Fabricantes |
BII112S-20000 | ROTOR DIMENSIONS | ETC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |