|
|
Número de pieza | SB-WA870EB | |
Descripción | Active Subwoofer System Service Manual | |
Fabricantes | Panasonic | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SB-WA870EB (archivo pdf) en la parte inferior de esta página. Total 34 Páginas | ||
No Preview Available ! ORDER NO. MD0403127C2
Active Subwoofer System
SB-WA870EB
SB-WA870EG
Colour
(S)...Silver Type
Specification
n Active subwoofer
Type
Speaker unit
Woofer
Output sound pressure
Frequency range
Dimensions (W x H x D)
Mass
1 way, 1 speaker system (Bass
reflex)
Impedance 4 Ω
20 cm Cone type
84 dB/W (1.0 m)
34 Hz-220 Hz (-16 dB)
38 Hz-190 Hz (-10 dB)
248 x 417 x 476.6 mm
16.4 kg
n General
Power consumption
Power supply
Continental Europe and Russia
The United Kingdom, Australia and
N.Z.
Power consumption in standby
mode
390V
AC 230V, 50Hz
AC 230V-240V, 50Hz
0.7 W
Notes :
1. Specifications are subject to change without notice.
2. Mass and dimensions are approximate.
SB-HT870P-S consists of :
SB-PF921P-S x 2, SB-PS921P-S x 2 and SB-PC920P-S x 1
n System : SC-HT870 (E)
Music Center: SA-HT870 (E)
Satellite Speakers: SB-HT870 (P)
Active Subwoofer: SB-WA870 (EG)
n System : SC-HT870 (EB)
Music Center: SA-HT870 (EB)
Satellite Speakers: SB-HT870 (P)
Active Subwoofer: SB-WA870 (EB)
n System : SC-HT870 (EG)
Music Center: SA-HT870 (EG)
Satellite Speakers: SB-HT870 (P)
Active Subwoofer: SB-WA870 (EG)
CONTENTS
1 Safety Precautions
1.1. GENERAL GUIDELINES
Page
3
3
2 Handling the Lead-free Solder
2.1. About lead free solder (PbF)
Page
4
4
© 2004 Panasonic AVC Networks Singapore Pte.
Ltd. All rights reserved. Unauthorized copying and
distribution is a violation of law.
http://www.Datasheet4U.com
1 page SB-WA870EB / SB-WA870EG
5 Connectio n of the Speaker Cables
· Be sure to connect speaker cables before connecting the AC power supply cord.
· The load impedance of any speaker used with this unit must be 4Ω.
· Be sure to connect the cable from the right speaker to the right terminal and the cable from the left speaker to the left terminal.
1. Strip off the outer covering, and twist the center conductor. Make sure the bare ends of the wires are not unravelled. (If they are,
twist them tight again.)
2. Insert the wire to the rear panel of the unit and close the lever.
Notes :
· To prevent damage to circuitry, never short-circuit positive (+) and negative (-) speaker wires.
· Be sure to connect only positive (Copper) wires to positive (+) terminals and negative (Silver) wires to negative (-) terminals.
5
5 Page SB-WA870EB / SB-WA870EG
Step 23: Place the Power P.C.B. and the Speaker
Interface P.C.B. as shown for checking.
11
11 Page |
Páginas | Total 34 Páginas | |
PDF Descargar | [ Datasheet SB-WA870EB.PDF ] |
Número de pieza | Descripción | Fabricantes |
SB-WA870EB | Active Subwoofer System Service Manual | Panasonic |
SB-WA870EG | Active Subwoofer System Service Manual | Panasonic |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |