Datenblatt-pdf.com


7026TX Schematic ( PDF Datasheet ) - N-TRON

Teilenummer 7026TX
Beschreibung Fully-Managed Switches User Manual
Hersteller N-TRON
Logo N-TRON Logo 




Gesamt 70 Seiten
7026TX Datasheet, Funktion
7026 Series
Managed Industrial
Ethernet Switch
User Manual &
Installation
Guide
(Revised 2011-11-15)
Free Datasheet http://www.datasheetlist.com/






7026TX Datasheet, Funktion
Copyright, © N-Tron Corporation, 2010-2011
820 S. University Blvd., Suite 4E
Mobile, AL 36609 USA
All rights reserved. Reproduction, adaptation, or translation without prior written permission from N-Tron
Corporation is prohibited, except as allowed under copyright laws.
Ethernet is a registered trademark of Xerox Corporation. All other product names, company names, logos
or other designations mentioned herein are trademarks of their respective owners.
The information contained in this document is subject to change without notice. N-Tron Corporation makes
no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of
merchantability or fitness for a particular purpose. In no event shall N-Tron Corporation be liable for any
incidental, special, indirect or consequential damages whatsoever included but not limited to lost profits
arising out of errors or omissions in this manual or the information contained herein.
Warning
Do not perform any services on the unit unless qualified to do so. Do not substitute unauthorized parts or
make unauthorized modifications to the unit.
Do not operate the unit with the top cover removed, as this could create a shock or fire hazard.
Do not block the air vents on the sides or the top of the unit.
Do not operate the equipment in the presence of flammable gasses or fumes. Operating electrical equipment
in such an environment constitutes a definite safety hazard.
Do not operate the equipment in a manner not specified by this manual.
(Revised 2011-11-15)
Page 6 of 169
Free Datasheet http://www.datasheetlist.com/

6 Page









7026TX pdf, datenblatt
Input AC 115/230V
Output DC 24-28V
Output Current 1.3A @ 24V
1.0A @ 28V
7026TX with AC Power Supply Installed
Power 30W
35 mm DIN-Rail Mountable
Dimensions: 45X75X91 mm
Unscrew & Remove the AC Voltage Input
Plug from the Power Input Header
Install the AC Power Cables into the Plug
(observing polarity).
Plug the Voltage Input Plug back into the
Power Input Header.
Tightening torque for the terminal block
power plug is 0.5 Nm/0.368 Pound Foot.
Verify the Power LED stays ON.
When an AC Power supply is installed (i.e., the AC option), Use 12-24 gauge wire when
connecting to the power supply.
(Revised 2011-11-15)
Page 12 of 169
Free Datasheet http://www.datasheetlist.com/

12 Page





SeitenGesamt 70 Seiten
PDF Download[ 7026TX Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
7026TXFully-Managed Switches User ManualN-TRON
N-TRON

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche