Datenblatt-pdf.com


FX11LA-92P-SV Schematic ( PDF Datasheet ) - HRS

Teilenummer FX11LA-92P-SV
Beschreibung 0.5mm Pitch Connectors
Hersteller HRS
Logo HRS Logo 




Gesamt 16 Seiten
FX11LA-92P-SV Datasheet, Funktion
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
FX11 Series
Stacking height : 2mm
Stacking height : 2.5mm, 3mm
Features
1. Low Profile Design
The board to board mating height of 2mm, 2.5mm and 3mm suits
smaller, thinner case designs.
2. Improved Transmission Efficiency Between Boards
Transmission characteristics have been improved through
a design that fixes ground plates to both sides of the
header and receptacle.
3. 10 Signal:1 Ground Arrangement
Signal and ground are arranged in a ratio of 10:1 with the
ground plate SMT connected to the board. The ground
stability achieved serves to reduce noise.
4. Metal Fittings for Added Solder Weld Strength
Metal fittings provide greater adhesion to the board,
protecting against peeling.The unique connector design
provides a connection between the fitting and the ground
plate for a stronger ground.
5. Suited to High-Density Applications
The signal contact pitch of 0.5mm produces a smaller
connector utilizing less board area for mounting.
6. Structure Prevents Solder Wicking
A solder gap has been designed into the contact SMT
portion to prevent solder wicking.
7. High contact reliability
Effective mating length is 0.55mm (2mm height),
1mm(2.5mm, 3mm height) for signal contacts.
8. Optional Ground Plate
An alternate style without the ground plate is available.The
space provided by the ground plate removal has been filled
with additional signal contacts.
Applications
Notebook computers, PDA, and other miniature electronic equipment.
10 Signal: 1 Ground Arrangement
Housing
Metal fitting
0.5mm
0.75mm
Ground Plate
Signal contact
0.75mm
Ground plate and metal fitting make contact
Stacking height variation
2mm 2.5 , 3
mm
Note: 2.0mm type and 2.5mm, 3mm type are not mated with each other.
Structure Prevent solder vicking
Contact
surface
Solder gap portion
Board mounting portion
Land
A222
Free Datasheet http://www.datasheet-pdf.com/






FX11LA-92P-SV Datasheet, Funktion
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be disconFtiXnu1e1d sSooenr. iPelesase0ch.5ecmk tmhe PpriotdcuhctsCsotantuns eonctthoerHsirowseitwhebGsitreoRuoHnSdseParlcahteat fwowrw.2himrosme-ctoonn3ecmtorms.cBomo, aorrcdo-nttoac-tByoouar rHdiroCseosnanlesercetpiroesnesntative.
Header without ground Plate
2mm stacking height
(0.5)
A±0.2
0.2±0.05
B±0.3
1-(Ø0.8)
C±0.1
Guidepost
Unit : mm
Part Number
CL No.
Number of contacts
ABCDE
Signal
Remarks
RoHS
FX11LA- 68P-SV(**) 573-0042-1-**
68 16.5 22.6 18 19.4 25.5
FX11LA- 92P-SV(**) 573-0043-4-**
92 22.5 28.6 24 25.4 31.5
With guideposts
FX11LA-116P-SV(**) 573-0044-7-** 116 28.5 34.6 30 31.4 37.5
FX11LA-140P-SV(**) 573-0045-0-** 140 34.5 40.6 36 37.4 43.5
FX11LB- 68P-SV(**) 573-0052-5-**
68 16.5 22.6 ---------- 19.4 25.5
YES
FX11LB- 92P-SV(**) 573-0053-8-**
92 22.5 28.6 ---------- 25.4 31.5
Without guideposts
FX11LB-116P-SV(**) 573-0054-0-** 116 28.5 34.6 ---------- 31.4 37.5
FX11LB-140P-SV(**) 573-0055-3-** 140 34.5 40.6 ---------- 37.4 43.5
[Specifications number] – **, (**)
Blank: Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
3 E min
Recommended metal mask thickness: 0.15 mm
B
+ 0.1
0
D--00.1
C±0.05
A±0.05
0.5±0.03
2 Ø0.9±0.05
0.75±0.05
Ø1±0.05 2
0.3±0.03(Land)
0.25±0.03(Metal mask)
Note 1 The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
2 Not required in products without guideposts.
3 Do not mount a part other than this product in the area of . Doing so will prevent the engagement
of this and the mating connector.
A227
Free Datasheet http://www.datasheet-pdf.com/

6 Page









FX11LA-92P-SV pdf, datenblatt
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be disconFtiXnu1e1d sSooenr. iPelesase0ch.5ecmk tmhe PpriotdcuhctsCsotantuns eonctthoerHsirowseitwhebGsitreoRuoHnSdseParlcahteat fwowrw.2himrosme-ctoonn3ecmtorms.cBomo, aorrcdo-nttoac-tByoouar rHdiroCseosnanlesercetpiroesnesntative.
Header without ground Plate
2.5mm stacking height
(0.5)
A±0.2
0.2±0.05
B±0.3
2-(Ø0.8)
C±0.1
Guidepost
Part Number
FX11A- 80P-SV(**)
FX11A-100P-SV(**)
FX11B- 80P-SV(**)
FX11B-100P-SV(**)
Unit : mm
CL No.
Number of contacts
ABCDE
Signal
Remarks
RoHS
573-0548-0-**
80 19.5 24.6 20 21.4 27.5
With guideposts
573-0543-7-** 100 24.5 29.6 25 26.4 32.5
YES
573-0558-4-**
80 19.5 24.6 ---------- 21.4 27.5
Without guideposts
573-0553-0-** 100 24.5 29.6 ---------- 26.4 32.5
[Specifications number] – **, (**)
Blank: Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
3 E min
Recommended metal mask thickness: 0.15 mm
B +0.1
0
D0
-0.1
C±0.05
A±0.05
0.5±0.03
2 Ø0.9±0.05
0.25±0.05
Ø1±0.05 2
0.3(Land)
0.25±0.03(Metal mask)
Note 1 The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
2 Not required in products without guideposts.
3 Do not mount a part other than this product in the area of . Doing so will prevent the engagement
of this and the mating connector.
A233
Free Datasheet http://www.datasheet-pdf.com/

12 Page





SeitenGesamt 16 Seiten
PDF Download[ FX11LA-92P-SV Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
FX11LA-92P-SV0.5mm Pitch ConnectorsHRS
HRS

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche