Datenblatt-pdf.com


B1116 Schematic ( PDF Datasheet ) - NEC

Teilenummer B1116
Beschreibung PNP Transistor - 2SB1116
Hersteller NEC
Logo NEC Logo 




Gesamt 6 Seiten
B1116 Datasheet, Funktion
DATA SHEET
SILICON TRANSISTORS
2SB1116, 1116A
PNP SILICON EPITAXIAL TRANSISTOR
FOR LOW-FREQUENCY POWER AMPLIFIERS AND MID-SPEED SWITCHING
FEATURES
• Low VCE(sat)
VCE(sat) = 0.20 V TYP. (IC = 1.0 A, IB = 50 mA)
• High PT in small dimension with general-purpose
PT = 0.75 W, VCEO = 50/60 V, IC(DC) = 1.0 A
• Complementary transistor with 2SD1616 and 1616A
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
Parameter
Collector to base voltage
Collector to emitter voltage
Emitter to base voltage
Collector current (DC)
Collector current (pulse)
Total power dissipation
Junction temperature
Storage temperature
Symbol
VCBO
VCEO
VEBO
IC(DC)
IC(pulse)*
PT
Tj
Tstg
Ratings
2SB1116 2SB1116A
60 80
50 60
6.0
1.0
2.0
0.75
150
55 to +150
* PW 10 ms, duty cycle 50%
ELECTRICAL CHARACTERISTICS (Ta = 25°C)
Unit
V
V
V
A
A
W
°C
°C
Parameter
Symbol
Conditions
Collector cutoff current
Emitter cutoff current
DC current gain
DC current gain
DC base voltage
Collector saturation voltage
Base saturation voltage
Output capacitance
Gain bandwidth product
Turn-on time
Storage temperature
Fall time
ICBO
IEBO
hFE1 **
hFE2 **
VBE **
VCE(sat) **
VBE(sat) **
Cob
fT
ton
tstg
tf
VCB = 60 V, IE = 0
VEB = 6.0 V, IC = 0
VCE = 2.0 V, IC = 100 mA
VCE = 2.0 V, IC = 1.0 A
VCE = 2.0 V, IC = 50 mA
IC = 1.0 A, IB = 50 mA
IC = 1.0 A, IB = 50 mA
VCB = 10 V, IE = 0, f = 1.0 MHz
VCE = 2.0 V, IC = 100 mA
VCC = 10 V, IC = 100 mA
IB1 = IB2 = 10 mA,
VBE(off) = 2 to 3 V
** Pulse test PW 350 µs, duty cycle 2%
PACKAGE DRAWING (UNIT: mm)
2SB1116, 1116A
MIN.
135
81
600
70
TYP.
MAX.
100
100
600/400
650
0.20
0.9
25
120
0.07
0.70
0.07
700
0.3
1.2
Unit
nA
nA
mV
V
V
pF
MHz
µs
µs
µs
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. D16195EJ1V0DS00 (1st edition)
Date Published April 2002 N CP(K)
Printed in Japan
©
21090928






B1116 Datasheet, Funktion
2SB1116, 1116A
The information in this document is current as of July, 2001. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4

6 Page







SeitenGesamt 6 Seiten
PDF Download[ B1116 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
B1110SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERSLite-On Technology
Lite-On Technology
B1114PNP Transistor - 2SB1114NEC
NEC
B1115PNP Transistor - 2SB1115NEC
NEC
B1115PNP SILICON EPITAXIAL TRANSISTORRenesas
Renesas
B1116PNP Transistor - 2SB1116NEC
NEC

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche